FS: Misc LT1 parts
FS: Misc LT1 parts
First, I must apologize to everyone who may have tried to previously contact me for parts from my car and not gotten a response. My computer recently crashed (and still isn't up yet) so I haven't been able to check much.
Here's a few things I have.
-stock 10 bolt, 3.23's, LSD, disc brakes on it (I can take them off if you don't want the brakes), 3 channel ABS
-front disc brakes (calipers/rotors/slightly worn pads)
-stock springs
-stock LT1 driveshaft
-A/C pump
-Power Steering pump
-Water pump
-Opti spark
-ABS unit
-Cruise control unit
-AIR pump
-Taylor 8mm wires, blue (brand new never used)
I have a near complete longblock as well, but the block has a small crack on the rear, so I won't be selling a cracked block.
That means I have stock heads, intake, pistons, rods, crank, cam, etc for sale.
I have a 4L60E transmission as well, but the housing is cracked up a bit. If you need any particular transmission parts though, I can take those out of the tranny and sell them as well.
To those who contacted me about the headers that I couldn't reply to, once I got the passenger side headers out, they're simply too bent to sell. Two of the pipes got completely crushed.
If you need anything, once again, please don't email, PM me, or post a reply to this thread!!! as I can't check those often w/ my computer being down. Either call my cell phone @ 281-923-2507, or you can send me an IM on AIM @ GrdLock31337. (I have AIM set to forward my IM's to my cell as well)
Many of the larger parts (rear-end, heads, manifold, etc) I would really like a local buyer, as I hate having to ship big stuff
Here's a few things I have.
-stock 10 bolt, 3.23's, LSD, disc brakes on it (I can take them off if you don't want the brakes), 3 channel ABS
-front disc brakes (calipers/rotors/slightly worn pads)
-stock springs
-stock LT1 driveshaft
-A/C pump
-Power Steering pump
-Water pump
-Opti spark
-ABS unit
-Cruise control unit
-AIR pump
-Taylor 8mm wires, blue (brand new never used)
I have a near complete longblock as well, but the block has a small crack on the rear, so I won't be selling a cracked block.
That means I have stock heads, intake, pistons, rods, crank, cam, etc for sale.I have a 4L60E transmission as well, but the housing is cracked up a bit. If you need any particular transmission parts though, I can take those out of the tranny and sell them as well.
To those who contacted me about the headers that I couldn't reply to, once I got the passenger side headers out, they're simply too bent to sell. Two of the pipes got completely crushed.
If you need anything, once again, please don't email, PM me, or post a reply to this thread!!! as I can't check those often w/ my computer being down. Either call my cell phone @ 281-923-2507, or you can send me an IM on AIM @ GrdLock31337. (I have AIM set to forward my IM's to my cell as well)

Many of the larger parts (rear-end, heads, manifold, etc) I would really like a local buyer, as I hate having to ship big stuff
Originally posted by 96-speed
How many miles were on the car?
Still have the alternator?
Ryan
How many miles were on the car?
Still have the alternator?
Ryan
Need the intake/fuel rails setup
heyas.. i have a 93 that i want upgrade to a 94+ intake/fuel rails setup to have the crossover tube for big fuel... lemme know if you have it and how much mullah youd like.. im in corpus but need to get it quickly... just the intake, fuel rails/regulator is all i need.. but will pick up the whole thing if you dont want to mess with the dismantling.. fuel rails in good shape? thanks..
Last edited by 63SSRagtop; Sep 17, 2003 at 05:58 PM.
Thread
Thread Starter
Forum
Replies
Last Post
oldschool
Parts For Sale
16
Feb 9, 2016 09:21 PM
JasonD
Site Help and Suggestions
9
Jul 15, 2002 02:17 PM



