you need to bring the black beast down here too when joe decides to come down here and run the 1320ft.

 

I wasn't racing, I was just behind them but I couldn't keep up. It was that dude w/ the white SS. He took it to LG and they put a cam in it. He said it dynoed 390 but I highly doubt that it was that high. I don't think he has any head work. He raced a '99 Vette. The Vette is getting a cam here in a few weeks. It has a set of heads and Corsa exhaust on it right now. They took off on Kell and I was behind them. The SS beat the Vette by about 2 carlengths or so. The guy in the SS said he could take it up to 6500 but he was only taking it to 6K because the cam was fresh. He said that it was still breaking in. I just listened and didn't say a word.

 

------------------
Stock 96TA,M6,with K&N cold air,March pulleys,MAF descreened,polished heads,CC503,Crane 1.6 RR's,LT-4 KM,BBK 52mm TB,PCMFORLESS programming,160*,Richmond 4.10s,MAC shorty headers,!EGR,!CATS,NGK TR55 plugs,Flowmaster Exhaust, Cutout,TB Bypass,!CAGS,SPEC Stage II Kevlar,AL. Driveshaft,BFG DR's

 

Mark,
Tell him that fine if he can beat you but at least you didn't spend $25,000+ on your car yet.

I think he paid like $2300 to have that cam put in. Thats crazy.

I'm not sure which silver SS your talking about. Does Shawn have a black Mustang? And that SS is his g/f's car and she used to have a teal Z but he wrecked it?

 

Don't worry I'll put him in his place soon enough.

 

Don't worry I'll put him in his place soon enough. [/QUOTE]

Yea, that's what I like to here! I would like to be around for that race.

Joe, you need to drive my car again. Your gonna like it.

Mark

------------------
Stock 96TA,M6,with K&N cold air,March pulleys,MAF descreened,polished heads,CC503,Crane 1.6 RR's,LT-4 KM,BBK 52mm TB,PCMFORLESS programming,160*,Richmond 4.10s,MAC shorty headers,!EGR,!CATS,NGK TR55 plugs,Flowmaster Exhaust, Cutout,TB Bypass,!CAGS,SPEC Stage II Kevlar,AL. Driveshaft,BFG DR's

 

It's not an SS. It's just a 2000 Z28 LS1. He doesn't even have the LS6 intake or anything the 2002's have. I think I can take him now that my car's running good.
His girlfriend has a Grandam. I don't think he has or had a black mustang. His dad has a nice Harley though.

I think Chris uses Arlington Motorsports for his mods. He would be about $3,000 richer if he used Joe!

Joe, oil leak stopped.


------------------
Stock 96TA,M6,with K&N cold air,March pulleys,MAF descreened,polished heads,CC503,Crane 1.6 RR's,LT-4 KM,BBK 52mm TB,PCMFORLESS programming,160*,Richmond 4.10s,MAC shorty headers,!EGR,!CATS,NGK TR55 plugs,Flowmaster Exhaust, Cutout,TB Bypass,!CAGS,SPEC Stage II Kevlar,AL. Driveshaft,BFG DR's

 

Cool I'm glad you got it stopped! Yeah just spred the word if any one want s stuff done for cheap come to me I'll even work on ls1's now.

Later

[This message has been edited by Smoke T/A (edited July 15, 2002).]

 

hey smoke, how's your expertise with clutch installs? i'll need an LT4 clutch installed in about two months. can you beat $200?

------------------
"the finest moment no man can measure is to look your savior in the eyes" -bebo norman
------------------
1996 z28 m6

 

I can do one but I could not beat the $200 installed. Not one of my faviorite things to do. $200 is dirt cheap. Probally take me about 4-5 hours from start to finish if i were to do it alone. I can do most stuff like heads and cam installs, rather not mess with rear ends gear set ups or converter/clutch installs. Even though i would do both for the right price! Thanks for asking though! Let me know if you or your friends need anything other than that installed. IE: headers, nitrous kits, guages, cam, heads just to name a few!

Joe

[This message has been edited by Smoke T/A (edited July 15, 2002).]

 

I got my car running A LOT better today but it still might have a slight high RPM stumble. Probably my opti****.

 

Cool Finally got my car up and running again! Let me know if you see Jeff and I'll come out there and stomp his ***.

 

I still need to fix that oil leak but I can't decide if I want to mess with it or just let Richard do it. I would let Richard do it but he takes too long. You got that opti back? How does it run? I think my car is running better right now than it ever has. I can't wait to see what it would feel like with a bigger throttle body. I have no doubt that it would run a .2-.3's quicker right now than it did before. It pulls unbelievably hard. It actually seems a little fast now.

------------------
Black 94Z A4 t-tops
!traction
"Mods? Nah, its stock with a bad miss and loud exhaust."

60ft: 2.03
1/8th: 8.58 @82.69 w/ a burned plug wire
The Z

 

How much for a CC305 cam install? You wouldn't have to do it yourself. I would help as much as I could and I could get others as well. Plus I can bring the car to you (anything to get the cost down ).

------------------
"the finest moment no man can measure is to look your savior in the eyes" -bebo norman
------------------
1996 z28 m6

[This message has been edited by soldierofchrist77 (edited July 16, 2002).]

 

You have mail!