PW/PL T-tops and auto.

195,000 miles on Body

75,000 miles on stock rebuilt motor (Don’t know cost previous owner has this done.)

15,000 Miles on Built Tranny (has Kevlar bands and Blue Clutches and a B&M shift kit, performance accumulator springs, high pressure release spring 3-4) $2800.00 worth of work and parts.

B&M Nitrous Holeshot 3600 stall converter $529.00

Nitrous Works wet kit
Adjustable from 75 to 175 horsepower, the system features The Nitrous Works' "freeze-free" spray bar design for more complete combustion and comes with the bolt-on spray bar plate, calibrated jets, solenoids, hose, filter, hardware, instructions, 14 ft./-4AN stainless bottle feed line, and a 10 lb. capacity bottle $560.00 plus $250.00 for install.

Replaced in last 12 months: Front strut mounts, Water pump, Opti spark, Plugs, wires, starter, belts, rear window struts, and out side door handles. Around $1000.00 for all this dealer installed.

Morso Cold Air $189.00
Morso Power pulleys $109.00
LT1 Edit (tuned for stall) $300.00
Hooker Quad tips $100.00
3” cutout $100.00

New Tires on the rear BFG Potenza’s $400.00 (last month)

I think this is it. Runs low 11's in 1/4

$6500.00 must sell
Andrew 972-965-9041
Located in Irving