Can someone please tell me what size cutout I need to get. I measured the I-pipe, and came up with right under 2.25". Some people said 2.25" and others said 2.5". For those of you with a 3.4, what size did you get? Thanks.

------------------
1995 3.4L Camaro, FlowMaster Exhaust 3" tips, TailBlazers, 2 12" RFosgate He2 Subs, 500 watt RF amp, Kenwood KDC-515 Player, Polk rear and Xplodes front speakers, GTS Headlight covers (smoke), Chevy emblem side markers, Clear Bumper lenses, Painted Camaro on steering wheel, K&N FIPK
My page

 

I don't have a cutout but I have a 3.4 with stock pipe and its 2.25....man I need to upgrade...



------------------
If you own a V6 Camaro or Firebird you need to be here!

http://www.fbodyv6.com/index.php

 

Go .25 larger than you need.If you have a 2.25 then get a 2.5,or if you have a 2.75 then get a 3.By the way,see if you can find a used cat-back from a WS6 or SS.You'll get a much bigger gain from that than with a cut-out.Good luck.
Kevin

------------------
1998 Black Z28 A4
-------1/8-------
8.548 @ 83.64 MPH
Pics
Camaro/Firebird Birthday Bash

 

I don't know how my setup will turno out.

But....

this is my plan, my y-pipe(2.5 in.) to a catco highflow cat, 2.5 in. to a cutout, 2.5in. to a S-pipe to a 2.75 in. catback sotck system off a z28, if the muffler feels restrictive I will change it to something else. Now at the track if I have too much flow with my cutout open I plan on rigging different size block off plates that will allow air threw and not block it off completley so I can fine tune the car.

this will be ditching the 2.25 in. i-pipe

------------------
-Eric
1994 Medium Quaser Blue Camaro 3.4L V6 w/ 5-speed
Stock blocked, boltons only.
15.696@86.22 with a 2.214 60'!
Best R/T .507 Best 60' 2.078
Father's Stock 2000 Navy Blue Camaro 3.8L V6 w/ 5-speed
15.875@88.25 With wheel spin in 1st
3.4L F-body where 15s are fast....
www.fbodyv6.com
www.firebirdv6.com
www.camaroz28.com
AIM: MustangEater82