Arizona Speed And Marine TB GP
#46
Re: Arizona Speed And Marine TB GP
Originally Posted by Munson
hey dave are you shipping these out yet?
I need two more.
Don, I will pull the intake off after lunch and take a look.
#48
Re: Arizona Speed And Marine TB GP
Originally Posted by OUTCAST
Dave,
PM sent to you thanks!
PM sent to you thanks!
For anyone inquiring, there is a hole just in front of the blade.
It is about a 1/4 in. wide and about 3/16 in deep going into the manifold.
The hole behind the blade is about a 1/2 in in diameter.
#49
Re: Arizona Speed And Marine TB GP
Thanks Dave.
So, all you should have to worry about is getting a piece of pipe from the back one to the idle air hole in the manifold. You should be able to do this with some copper or brass tubing.
So, all you should have to worry about is getting a piece of pipe from the back one to the idle air hole in the manifold. You should be able to do this with some copper or brass tubing.
#50
Re: Arizona Speed And Marine TB GP
Originally Posted by CMSDave
PM sent back.
For anyone inquiring, there is a hole just in front of the blade.
It is about a 1/4 in. wide and about 3/16 in deep going into the manifold.
The hole behind the blade is about a 1/2 in in diameter.
For anyone inquiring, there is a hole just in front of the blade.
It is about a 1/4 in. wide and about 3/16 in deep going into the manifold.
The hole behind the blade is about a 1/2 in in diameter.
PM returned thanks again!
#52
Re: Arizona Speed And Marine TB GP
TTT, I am not going to let this die.............
Can this be linked over to another board????
Jim
Can this be linked over to another board????
Jim
#53
Re: Arizona Speed And Marine TB GP
On the 'list', but have made initial contact, with phone call from Ben @AS&M, regarding relevant IAC issue. Asked me to forward links (I sent 3) explaining/identifying problem, which Ben didn't appear to be aware of. ??? Would much prefer followup 'closure' with AS&M prior to financial commitment.
Last edited by arnie; 08-01-2004 at 07:39 AM.
#54
Re: Arizona Speed And Marine TB GP
arnie go ask someone in advanced tech like mindgame they can surely tell you what size will be appropriate
#55
Re: Arizona Speed And Marine TB GP
For all those intrested in modifying the AS&M TB for IAC, here is what I did.
http://www.chipsbyal.com/idle/tbi.htm
HTH
Kenny
http://www.chipsbyal.com/idle/tbi.htm
HTH
Kenny
Last edited by KenP; 08-01-2004 at 07:36 AM.
#56
Re: Arizona Speed And Marine TB GP
One of the 3 links (aware of 4) explaining the problem with corrective measures, that I emailed to AS&M. I have difficulty understanding why the purchaser needs to modify the TB, tying a loose end mfr. shouldn't have left open, in the first place.
Last edited by arnie; 08-01-2004 at 07:50 AM.
#58
Re: Arizona Speed And Marine TB GP
I also find it difficult to believe someone hadn't approached AS&M prior to this, regarding the IAC issue. AS&M appeared baffled, to hear there has been an issue with the IAC circuit.
Last edited by arnie; 08-01-2004 at 08:50 PM.
#59
Re: Arizona Speed And Marine TB GP
could be the 10th guy! only cuz need the mononbade just not sure bout that Iac thing!! anyway, also, how long before the orders shipped and Dave do u have enough available(monoblades)to fill the order or with their be a backorder issue? hanks for the info !
#60
Re: Arizona Speed And Marine TB GP
he needs one more order for the gp to go through then i think he's shipping them give him a call