[Florida] Garage Clean Out..LS/LT and random stuff
02-10-2011, 07:35 AM
#1
Registered User
Thread Starter
Join Date: Dec 2003
Posts: 250
Garage Clean Out..LS/LT and random stuff
93-97 Camaro dash. Legit GM peice with NO, again NO, cracks. Does have two mounting tabs on brack broken that affected it in no way. $75 obo
Stage 8 locking header bolts. Missing one lock and bolt. $20obo
Stage 8 locking header bolts. Missing one lock and bolt. $20obo
02-10-2011, 07:36 AM
#2
Registered User
Thread Starter
Join Date: Dec 2003
Posts: 250
Re: Garage Clean Out..LS/LT and random stuff
LT1 K&N intake. No Filter but has Maf to Tube coupler. $35 obo
87-92 TPI intake. Bought to try something i dont think anyone else had. The LS1 lid became a popular swap..we wanted to try this cause it seemed to be a lot more low profile and would remove some of the hood clearence issues the LS1 lid caused..never got around to it. $10 obo
LT1 positive distribution block with Cover. Kinda hard to find just cause the heat kills the plastic hinge. $5obo
87-92 TPI intake. Bought to try something i dont think anyone else had. The LS1 lid became a popular swap..we wanted to try this cause it seemed to be a lot more low profile and would remove some of the hood clearence issues the LS1 lid caused..never got around to it. $10 obo
LT1 positive distribution block with Cover. Kinda hard to find just cause the heat kills the plastic hinge. $5obo
02-10-2011, 07:37 AM
#3
Registered User
Thread Starter
Join Date: Dec 2003
Posts: 250
Re: Garage Clean Out..LS/LT and random stuff
Power delete window swtich plates. I have two sets and they are both GM with no cracks and both have retaining clips on back. $22 shipped each.
1.0 FARAD cap. Got this in trade somehow. No clue anything about it. You will know more than me about it. $15 obo
Borla exhaust setup. Actually from a STS caddy. One muffler in good shape. One has a VERY large scrap/dent but isnt punctured. Im sure this was a $600+ setup new. make me an OFFER! I have no idea what to ask
190 AMP alt. Was told it was LS based but no clue. its brand new! OFFER
1.0 FARAD cap. Got this in trade somehow. No clue anything about it. You will know more than me about it. $15 obo
Borla exhaust setup. Actually from a STS caddy. One muffler in good shape. One has a VERY large scrap/dent but isnt punctured. Im sure this was a $600+ setup new. make me an OFFER! I have no idea what to ask
190 AMP alt. Was told it was LS based but no clue. its brand new! OFFER
02-10-2011, 07:38 AM
#4
Registered User
Thread Starter
Join Date: Dec 2003
Posts: 250
Re: Garage Clean Out..LS/LT and random stuff
LT1 dash gauge over lay. No clue what brand. Could be RKsport $$ or ebay. haha. $10obo
Red Dead Redemption for PS3. Its be played twice at most. No scratches and everything is there. $25obo
Red Dead Redemption for PS3. Its be played twice at most. No scratches and everything is there. $25obo
02-11-2011, 12:10 PM
#6
Registered User
Thread Starter
Join Date: Dec 2003
Posts: 250
Re: Garage Clean Out..LS/LT and random stuff
shoot me an offer on the tips. Im not sure how well that will work as they exit the mufflers at a slight angle. However, i would think any good exhaust shop would be able to fabricate a y to make them work.
02-25-2011, 03:44 PM
#10
Registered User
Thread Starter
Join Date: Dec 2003
Posts: 250
02-25-2011, 03:46 PM
#11
Registered User
Thread Starter
Join Date: Dec 2003
Posts: 250
02-26-2011, 05:39 AM
#13
Registered User
Thread Starter
Join Date: Dec 2003
Posts: 250
Re: Garage Clean Out..LS/LT and random stuff
They were asking about the 3rd gen intake. That is the one i bought to try something random with a friend and see if we could get a TPI 3rd gen intake to work better on an LT1 than a LS1 lid swap
Thread
Thread Starter
Forum
Replies
Last Post