'33 Truck Project
11-30-2006, 08:16 PM
#1
Registered User
Thread Starter
Join Date: Nov 2003
Location: Melbourne, Fl
Posts: 123
'33 Truck Project
All of this is located in Melbourne, Florida. (i sometimes drive to georgia, oklahoma, missouri and the states in between, if interested we could work something out). If you don't like a price, PM me a deal I can't refuse. It was for a project that I won't be able to finish, and mostly just want my money back.
1933 CHEVROLET/FORD TRUCK BODY
1933 Chevrolet truck cab.
most of the panels have been sandblasted or stripped of paint, etc
some panels have the dents hammered out of them
there is rust and holes in many of the body panels, but the only horrible parts are towards the bottom. the roof is in very good shape. the windshield frame is complete and still tilts like it should. entire cab is disassembled and ready to be put back together, we just never got around to it. no glass. Dashboard is perfect.
also have a shortened 1932 Ford model T bed. It's about 2 feet long and has the original Ford tailgate. all body panels are in fairly rough shape, but they've all been cleaned up and partially repaired. Would be a perfect start for a budget rat rod project.
1953 FORD AXLES/STEERING
genuine 1953 ( i think) ford truck front axles. Front axle is in great shape. Recently rebuilt and painted. Looks pretty much perfect. has hubs, but no brakes. Also have original DANA 44 rear end. There are various steering pieces that come with it. I forget all that's there honestly, but some of the harder to find pieces are included.
1928 CHEVY FRAME/AXLES
original 1928 Chevy frame and axles. Don't know anything about the shape of the axles, I was planning on junking them since I had the '53 axles. Come with original leaf springs. The frame has light surface rust and is in great shape for it's age. it was used as a trailer at some point in its life, so the bracing in the middle is not stock. Frame horns at the front are in good shape as well. Overall a great frame to start building a custom off of.
TURBO 350 TRANSMISSION
Bought it for the project, but I need money. Looks to be recently rebuilt and in good shape. Has stock torque converter.
Also have a set of black steelie rims in the same bolt pattern as the ford axles with roller tires. have a set of 28" radial TA tires if you want them. Will also throw in an original Ford Model A radiator frame in good shape and a complete, ready to go together, unassembled Chevy 355 shortblock.
Would like $1900 out of all of it, but I really need this stuff gone, so send me a PM or email agreer@fit.edu if youre' remotely interested and we can work something out. Also willing to part some of it out if you're serious.
Here's a pic of the cab in mock-up
Here's some pics of the cab in mock-up
<img src=http://i12.photobucket.com/albums/a207/jeepinjason/cab1rs.jpg>
<img src=http://i12.photobucket.com/albums/a207/jeepinjason/cab2rs.jpg>
1933 CHEVROLET/FORD TRUCK BODY
1933 Chevrolet truck cab.
most of the panels have been sandblasted or stripped of paint, etc
some panels have the dents hammered out of them
there is rust and holes in many of the body panels, but the only horrible parts are towards the bottom. the roof is in very good shape. the windshield frame is complete and still tilts like it should. entire cab is disassembled and ready to be put back together, we just never got around to it. no glass. Dashboard is perfect.
also have a shortened 1932 Ford model T bed. It's about 2 feet long and has the original Ford tailgate. all body panels are in fairly rough shape, but they've all been cleaned up and partially repaired. Would be a perfect start for a budget rat rod project.
1953 FORD AXLES/STEERING
genuine 1953 ( i think) ford truck front axles. Front axle is in great shape. Recently rebuilt and painted. Looks pretty much perfect. has hubs, but no brakes. Also have original DANA 44 rear end. There are various steering pieces that come with it. I forget all that's there honestly, but some of the harder to find pieces are included.
1928 CHEVY FRAME/AXLES
original 1928 Chevy frame and axles. Don't know anything about the shape of the axles, I was planning on junking them since I had the '53 axles. Come with original leaf springs. The frame has light surface rust and is in great shape for it's age. it was used as a trailer at some point in its life, so the bracing in the middle is not stock. Frame horns at the front are in good shape as well. Overall a great frame to start building a custom off of.
TURBO 350 TRANSMISSION
Bought it for the project, but I need money. Looks to be recently rebuilt and in good shape. Has stock torque converter.
Also have a set of black steelie rims in the same bolt pattern as the ford axles with roller tires. have a set of 28" radial TA tires if you want them. Will also throw in an original Ford Model A radiator frame in good shape and a complete, ready to go together, unassembled Chevy 355 shortblock.
Would like $1900 out of all of it, but I really need this stuff gone, so send me a PM or email agreer@fit.edu if youre' remotely interested and we can work something out. Also willing to part some of it out if you're serious.
Here's a pic of the cab in mock-up
Here's some pics of the cab in mock-up
<img src=http://i12.photobucket.com/albums/a207/jeepinjason/cab1rs.jpg>
<img src=http://i12.photobucket.com/albums/a207/jeepinjason/cab2rs.jpg>
Thread
Thread Starter
Forum
Replies
Last Post
jackpawt883
LT1 Based Engine Tech
7
09-10-2015 08:53 PM
PFYC
Supporting Vendor Group Purchases and Sales
0
08-07-2015 08:52 AM