I need all of these parts for my 1993 LT1.

1. Stock intake elbow.
2. Coolant temp sensor (the one on the drivers side head)
3. Oil pressure sending unit
4. 2 & 5/8" autometer sport comp or ultra lite oil pressure gauge.

Thanks-joe

 

This is all out of a 96 z28 M6

1) i have the stock exhuast header back (manifold/collectors/ypipe with cats/muffler/tips
2)i have the stock shifter with boot and ****
3)i have grey cloth seats front and backs
4)stock intake unit with K&N
5)stock head unit (cass/am/fm)
6)side molding with z28 emblems (sides and back)
7)stock starter (broken soliniod tho starter still works tho)


my email is shadykid102@netscape.net

 

These are going on an S-10 so all i would need would be the stock intake elbow. Thanks-joe

 

joe, i'm ditching ALL the intake ducting from like.... 3 different Lt1 F-bodies. including filters and elbows, and all. The elbows are all crap, pretty much all melty and cracked and crappy right above where the thermostat housing sits. sooo, while my elbows are bad, you can have all the rest if you want. i'm just planning to throw it all out cuz i have a ram air setup now and the rest were from parts cars
let me know if you're interested, this was just a shot in the dark
thanks

 

what do you want for it all shipped to 61265 IL? If the intake elbow is useable at all i will take them. Thanks-Joe

 

i'll get back to you in a day or two. i'm going to go through the "box" and see exactly what all i have. there should be nearly 3 complete systems, unless i already ditched one of the elbows along the way. i'm pretty sure you could make at least one of them work, might take a little finaggling to get the rubber over the throttle body, but once you get it, a clamp would make sure it seals well.