WELD Draglites 15 x 10 x 5.5" backspace w/ Hoosier drag slicks: $400 / pair
 

These are now sold.

nearly new 15 x 10's in a 5.5 inch back space. They are outfitted with Hoosier Quicktime Pro, 27 x 11.5 x 15LT.

They are the absolute largest wheel & tire combination you can fit within the stock wheel well of a third-generation F-body. These wheels come with the appropriate 4mm spacer as well as a new set of metric wheel studs, plus new center caps. You will have to use an adjustable panhard rod to make sure your axle is perfectly centered at ride-height.

The wheels have been mounted only twice on the car, and with the exception of one little nick, they are scratch-free and look as-new. There is some slight scoring on the inside of one wheel from trial fitment, but it's invisible from the outside.

Big, Bad, and ready for some quick passes, if you have motor enough to turn them. I'd use them but my drag racing days are probably over until my kids grow up.

http://ws6transam.org/Gallery/albums...x10d.sized.jpg

http://ws6transam.org/Gallery/Excite...d15x10d?full=1

http://ws6transam.org/Gallery/albums...x10e.sized.jpg

http://ws6transam.org/Gallery/albums...x10e.sized.jpg

http://ws6transam.org/Gallery/albums...x10f.sized.jpg

http://ws6transam.org/Gallery/Excite...d15x10f?full=1

These are now sold to a member from Thirdgen.org.

Re: WELD Draglites 15 x 10 x 5.5" backspace w/ Hoosier drag slicks: $400 / pair
 

damn if you were only local, bump for you

Re: WELD Draglites 15 x 10 x 5.5" backspace w/ Hoosier drag slicks: $400 / pair
 

Thanks. I "suppose" I could check to see what it costs to ship 'em... I could probably cut four wooden 15-inch discs, bolt them together over the wheels as wheel covers and ship them that way... Hmm.

Oh, and the metric studs arent metric studs. They are metric lugnuts for the WELD series of wheels, new in the package.

Re: WELD Draglites 15 x 10 x 5.5" backspace w/ Hoosier drag slicks: $400 / pair
 

It turns out that these tires also fit the 4 1/2" five-lug pattern on the newer Mustangs. The Mustang folks run either 6 1/2 offset with a 1/2" spacer, or 5.5 inch offset direct. So if you've got a late-model Mustang with the 5-lug axle, you can run these wheels as well.