Various Parts, Drivetrain, and other accessories, MUST look inside SERIOUS PARTS
02-04-2004, 05:04 PM
#1
Registered User
Thread Starter
Join Date: Apr 2000
Location: Yakima WA
Posts: 555
Various Parts, Drivetrain, and other accessories, MUST look inside SERIOUS PARTS
All kinds of SBC, LT1, LS1 and universal parts intermixed in here. Please do look at everything as theres something for everyone here. Also take a look at the Engine I'm selling here:
http://web.camaross.com/forums/showt...hreadid=220760
NEW Neal Chance 10" Bolt together converter. ~4500 Stall behind 600hp 396ci SB. The last Converter you will ever buy! $1200 $1800 from Chance)
Fresh Built TH400 Trans w/ new B&M Brake. LT1 PCM Friendly VSS Sensor $800
NEW CSI Carbon Fiber Trans/Bellhousing Shield $200 ($295 from Summit)
NEW FAST Sequential w/ Iindividual Cylinder Control, Wideband 02, 2 Stages of Dry N20, Stand Alone Harness, and built in Launch timing retard (perfect for small tire N20 Combination) $3000 ($3525 from Jeff Prock)
NEW FAST ECU Data Logger $250 ($336 from Young's Performance)
NEW MSD Cam Sync Crank Trigger Distributor $250 ($429 from Summit)
MSD Digital 7 Plus Ignition $375 ($529 from Summit)
NEW MSD HVCII Coil $100 ($129 from Summit)
NEW Crane PS92 Coil $45 ($69 from Summit)
NEW 2 stage Wilson Plate System. Flowed for Dry Enrichment by Jeff Prock, Custom system Email for details. $750 (Plate From Wilson $862+ $500 for custom work done by Prock, Cost $1362)
2 NEW 15# NX Bottles $150 each
3 Used 15# NX Bottles w/ DF5 Bottle Valves $200 each (Each Valve Alone is $200+ from NX Vendors) See Pic Here
Fully Polished LT1 Waterpump, w/ CSI Pump $175
NEW Weldon EFI Fuel Pressure Regulator $175 ($219 from Young's Performance)
NEW 160# Injectors $350 ($580 from Young's Performance)
NEW Aerospace Components Vacuum Pump, Check Valve, and Overflow/Breather Tank, and Crank Drive $450 ($689 from Aerospace)
NEW Polished Aluminum Hinged Bottle brackets, quick release latches, w/ 2 5/8" Roll Cage Mounts VERY TRICK! $125 ($175 from NX)
NEW Custom HYdraulic Roller LS1 Cam 230/228 @.050, .595/.578 lift, 112LS $225 ($300+)
NEW Custom Hydraulic Roller LS1 Cam 214/215 @.050, .552/.531 lift, 114LS $225 ($300+)
NEW Custom Solid Roller SBC Cam 272/280 @.050, .680/.681 lift 110LS $150 ($250+)
NEW Custom Solid Roller LT1 Cam 274/282 @.050, .715/.696 lift 110LS $150 ($250+)
3.50 Ratio Ford 9" Gears Used, perfect and quiet $60 ($175 new)
NEW Yank TH400 Crossmember for 98+ F-Body $75
Q-Logic SubBox for 4th Gen F-Body Black Loaded w/ 2 10" Fosgate Subs (400W rms each) $200 (~$500 New)
I have several RAM LS1 VDS Clutch Packages that I bought to resell. I just need to dump them. If you are in the market email me. This is your chance to save a few hundred bucks. Some parts listed as new may have been installed but never actually used.
No reasonable offers refused. Lots of excellent parts here. I will remove sold items, and add some that I missed/forgotten. Buyer pays Shipping. Some larger items I prefer not to ship but will at Buyer's expense of packaging and shipping.
Please email me at KTamez1320@hotmail.com w/ any questions.
http://web.camaross.com/forums/showt...hreadid=220760
NEW Neal Chance 10" Bolt together converter. ~4500 Stall behind 600hp 396ci SB. The last Converter you will ever buy! $1200 $1800 from Chance)
Fresh Built TH400 Trans w/ new B&M Brake. LT1 PCM Friendly VSS Sensor $800
NEW CSI Carbon Fiber Trans/Bellhousing Shield $200 ($295 from Summit)
NEW FAST Sequential w/ Iindividual Cylinder Control, Wideband 02, 2 Stages of Dry N20, Stand Alone Harness, and built in Launch timing retard (perfect for small tire N20 Combination) $3000 ($3525 from Jeff Prock)
NEW FAST ECU Data Logger $250 ($336 from Young's Performance)
NEW MSD Cam Sync Crank Trigger Distributor $250 ($429 from Summit)
MSD Digital 7 Plus Ignition $375 ($529 from Summit)
NEW MSD HVCII Coil $100 ($129 from Summit)
NEW Crane PS92 Coil $45 ($69 from Summit)
NEW 2 stage Wilson Plate System. Flowed for Dry Enrichment by Jeff Prock, Custom system Email for details. $750 (Plate From Wilson $862+ $500 for custom work done by Prock, Cost $1362)
2 NEW 15# NX Bottles $150 each
3 Used 15# NX Bottles w/ DF5 Bottle Valves $200 each (Each Valve Alone is $200+ from NX Vendors) See Pic Here
Fully Polished LT1 Waterpump, w/ CSI Pump $175
NEW Weldon EFI Fuel Pressure Regulator $175 ($219 from Young's Performance)
NEW 160# Injectors $350 ($580 from Young's Performance)
NEW Aerospace Components Vacuum Pump, Check Valve, and Overflow/Breather Tank, and Crank Drive $450 ($689 from Aerospace)
NEW Polished Aluminum Hinged Bottle brackets, quick release latches, w/ 2 5/8" Roll Cage Mounts VERY TRICK! $125 ($175 from NX)
NEW Custom HYdraulic Roller LS1 Cam 230/228 @.050, .595/.578 lift, 112LS $225 ($300+)
NEW Custom Hydraulic Roller LS1 Cam 214/215 @.050, .552/.531 lift, 114LS $225 ($300+)
NEW Custom Solid Roller SBC Cam 272/280 @.050, .680/.681 lift 110LS $150 ($250+)
NEW Custom Solid Roller LT1 Cam 274/282 @.050, .715/.696 lift 110LS $150 ($250+)
3.50 Ratio Ford 9" Gears Used, perfect and quiet $60 ($175 new)
NEW Yank TH400 Crossmember for 98+ F-Body $75
Q-Logic SubBox for 4th Gen F-Body Black Loaded w/ 2 10" Fosgate Subs (400W rms each) $200 (~$500 New)
I have several RAM LS1 VDS Clutch Packages that I bought to resell. I just need to dump them. If you are in the market email me. This is your chance to save a few hundred bucks. Some parts listed as new may have been installed but never actually used.
No reasonable offers refused. Lots of excellent parts here. I will remove sold items, and add some that I missed/forgotten. Buyer pays Shipping. Some larger items I prefer not to ship but will at Buyer's expense of packaging and shipping.
Please email me at KTamez1320@hotmail.com w/ any questions.
Last edited by KTamez; 02-06-2004 at 05:29 PM.
02-04-2004, 06:01 PM
#2
Registered User
Join Date: Apr 2003
Location: Dallas/ Htown, Texas
Posts: 616
Interested in box and subs send pics to jim2west@yahoo.com
02-04-2004, 11:57 PM
#5
Registered User
Join Date: Mar 2000
Location: Grand Rapids, Mi USA
Posts: 409
Hi Kurtis,
The MSD Digital 7 box you have for sale would this by chance be the Programmable Ignition box? MSD-7530 OR 7535? If this is either of them I will take the box.
Also if it is the unite stated above I will also take the coil and what ever else you had for it. Has this stuff been used or is it new?
Just to throw this on the table to let ya know I would give ya $2,000.00 for the entire Fast system less your data logger. I know its worth every penny your asking but I just purchased a new ECU for my new motor and could use what ya have for either my small block or back up system.
Let me know.
Thanks,
Jim
The MSD Digital 7 box you have for sale would this by chance be the Programmable Ignition box? MSD-7530 OR 7535? If this is either of them I will take the box.
Also if it is the unite stated above I will also take the coil and what ever else you had for it. Has this stuff been used or is it new?
Just to throw this on the table to let ya know I would give ya $2,000.00 for the entire Fast system less your data logger. I know its worth every penny your asking but I just purchased a new ECU for my new motor and could use what ya have for either my small block or back up system.
Let me know.
Thanks,
Jim
Last edited by JWINN; 02-05-2004 at 12:06 AM.
02-05-2004, 11:56 AM
#7
Registered User
Thread Starter
Join Date: Apr 2000
Location: Yakima WA
Posts: 555
Jody,
$105 Shipped for the coil will work for me.
Jim,
The Ignition is NOT the programmable. It is MSD #7520. Sorry can't swing the FAST system at that. Thanx for the offer though. I'll email ya on the center section once I get caugfht up some, my mailbox is pouring over w/ replies to these ads, I may have EXACTLY what ya need. do you need 35 or 40 Spline?
$105 Shipped for the coil will work for me.
Jim,
The Ignition is NOT the programmable. It is MSD #7520. Sorry can't swing the FAST system at that. Thanx for the offer though. I'll email ya on the center section once I get caugfht up some, my mailbox is pouring over w/ replies to these ads, I may have EXACTLY what ya need. do you need 35 or 40 Spline?
02-05-2004, 12:15 PM
#9
Registered User
Thread Starter
Join Date: Apr 2000
Location: Yakima WA
Posts: 555
Jody, Looking at MSD's site, it is recommended for MSD 7AL series, 8 Series and Digital 7 ignitions.
All the more reason to buy the Digital 7 I have too! LOL.
Let me know if you're still interested.
Kurtis
All the more reason to buy the Digital 7 I have too! LOL.
Let me know if you're still interested.
Kurtis
02-05-2004, 01:40 PM
#11
Registered User
Join Date: Mar 2000
Location: Grand Rapids, Mi USA
Posts: 409
Originally posted by KTamez
Jody,
$105 Shipped for the coil will work for me.
Jim,
The Ignition is NOT the programmable. It is MSD #7520. Sorry can't swing the FAST system at that. Thanx for the offer though. I'll email ya on the center section once I get caugfht up some, my mailbox is pouring over w/ replies to these ads, I may have EXACTLY what ya need. do you need 35 or 40 Spline?
Jody,
$105 Shipped for the coil will work for me.
Jim,
The Ignition is NOT the programmable. It is MSD #7520. Sorry can't swing the FAST system at that. Thanx for the offer though. I'll email ya on the center section once I get caugfht up some, my mailbox is pouring over w/ replies to these ads, I may have EXACTLY what ya need. do you need 35 or 40 Spline?
02-05-2004, 05:35 PM
#13
Registered User
Join Date: Oct 2000
Location: Dover DE
Posts: 1,620
Kurtis,any more info on the msd distributer,i glanced through the site,but didnt see it (i may be blind).
also somewhat interested in what all comes with the plate setup,but distributer is what im looking at now.
sorry to see you are selling everything,but good luck with the new oppertunity.
also somewhat interested in what all comes with the plate setup,but distributer is what im looking at now.
sorry to see you are selling everything,but good luck with the new oppertunity.