Procharger, Powder Coated, D1SC, FMIC for LT1 10 - 15+psi
#1
Procharger, Powder Coated, D1SC, FMIC for LT1 10 - 15+psi
*****SOLD******
This 725+ hp ProCharger D1SC with Front Mount Intercooler for an LT1 works great!
This is a highly upgraded D1SC kit by Speed Inc, for a '93-'97 Camaro or Trans Am that includes the following:
- Polished D1SC Supercharger
- Polished 5" thick aluminum racing intercooler
- Gloss black, powder coated charge pipes replace all of the original plastic piping
- Pulley produced 16 lbs of boost on a 383 LT4
- Vortec, Mondo blow-off valve (sounds awesome)
- 12 rib racing pulley/ belt system
- I have the original 8-10 lb, 12 rib pulley that I will include (This should run off the factory fuel system, the installed pulley required upgraded fueling)
- Crush-proof, steel reinforced, flexable intake pipe (not dryer hose!)
- Reusable air filter
- Procharger in-line fuel system
- 3 bottles of Procharger oil
- Procharger installation manual (kit installs the same as the normal Procharger system, with the exception of the intercooler location which isn't hard
- All mounting plates, bolts, and clamps
- Factory LT1 IAT temperature sensor included in throttle body elbow
- Welded blade style MAF/IAT sensor from an LS3 in charge pipe
- Bung welded in charge pipe for another sensor (boost gauge), currently plugged (I had a Hobbs switch installed to activate a second in-tank fuel pump past 5lbs of boost)
- Intercooler mounts to factory bumper location begin the bumper cover
- The kit has about 5,000 miles on it
- One charge pipe has a small dent from a trailer loading incident that is shown in the pics (This did NOT effect performance)
- There is a small amount of flat black overspray on 2 pipes (not visible when installed)
Looking for $4,500 plus shipping - it's all boxed up and ready to go!
This 725+ hp ProCharger D1SC with Front Mount Intercooler for an LT1 works great!
This is a highly upgraded D1SC kit by Speed Inc, for a '93-'97 Camaro or Trans Am that includes the following:
- Polished D1SC Supercharger
- Polished 5" thick aluminum racing intercooler
- Gloss black, powder coated charge pipes replace all of the original plastic piping
- Pulley produced 16 lbs of boost on a 383 LT4
- Vortec, Mondo blow-off valve (sounds awesome)
- 12 rib racing pulley/ belt system
- I have the original 8-10 lb, 12 rib pulley that I will include (This should run off the factory fuel system, the installed pulley required upgraded fueling)
- Crush-proof, steel reinforced, flexable intake pipe (not dryer hose!)
- Reusable air filter
- Procharger in-line fuel system
- 3 bottles of Procharger oil
- Procharger installation manual (kit installs the same as the normal Procharger system, with the exception of the intercooler location which isn't hard
- All mounting plates, bolts, and clamps
- Factory LT1 IAT temperature sensor included in throttle body elbow
- Welded blade style MAF/IAT sensor from an LS3 in charge pipe
- Bung welded in charge pipe for another sensor (boost gauge), currently plugged (I had a Hobbs switch installed to activate a second in-tank fuel pump past 5lbs of boost)
- Intercooler mounts to factory bumper location begin the bumper cover
- The kit has about 5,000 miles on it
- One charge pipe has a small dent from a trailer loading incident that is shown in the pics (This did NOT effect performance)
- There is a small amount of flat black overspray on 2 pipes (not visible when installed)
Looking for $4,500 plus shipping - it's all boxed up and ready to go!
Last edited by MysticBowtie; 07-13-2017 at 05:06 PM. Reason: sold