Ported LT4 heads/intake...Forged pistons/rods for sale
06-13-2012, 11:06 PM
#1
Registered User
Thread Starter
Join Date: Apr 2002
Location: Colorado Springs
Posts: 259
Ported LT4 heads/intake...Forged pistons/rods for sale
Heads are sold.
These heads are off of Jeff Wendlings award winning and powerfull Impala SS. Check out the feature here. Mark McCallon, RMCR's(Rocky Mountain Competetive Research) president race-ported this set of LT4 cylinder heads and gave them a five-angle valve job. 2.00 intake and 1.55 exhaust valves, and a 56cc chamber, screw in rocker studs, and double springs with a coil bind of .670 lift. I have not had anything done to these besides a decent cleaning. I was going to use them, but have decided to go a different route for now. These heads made over 600rwhp on his new blower setup without nitrous. $1300 shipped. Pics below. Heads are sold....
Email me at maverick95ss@hotmail.com for a faster respose.
SRP Forged pistons and rods...
SRP pistons part number is 139631, inverted dome pistons. For forced induction motors.
4.020 bore/3.480 stroke/5.700 rod.....more here.
Only issue can be seen in the pictures below. Some of the piston skirts have light scratches. Not effecting performance at all. And one piston has a few tiny indentions from what appears to be some very small metal. This will also not effect performance at all. These are $600 pistons. Can let them go for $175 shipped.
Summit Racing's Pro Light I-beam connecting rods. 5.700" 4340 forged I-beam. These are no longer made and are some of the best rods they every had made for them. Rumored they were from Scat. Best match on Summit now is there stage II rods at around four bills. Can do $150 shipped on these. Perfect shape.
The pistons and rods are balanced together and numbered. If sold together as a set, it will help you out and I will let them go for $300 shipped fo the entire set. Set is sold pending payment.
PM me please.
Mav
These heads are off of Jeff Wendlings award winning and powerfull Impala SS. Check out the feature here. Mark McCallon, RMCR's(Rocky Mountain Competetive Research) president race-ported this set of LT4 cylinder heads and gave them a five-angle valve job. 2.00 intake and 1.55 exhaust valves, and a 56cc chamber, screw in rocker studs, and double springs with a coil bind of .670 lift. I have not had anything done to these besides a decent cleaning. I was going to use them, but have decided to go a different route for now. These heads made over 600rwhp on his new blower setup without nitrous. $1300 shipped. Pics below. Heads are sold....
Email me at maverick95ss@hotmail.com for a faster respose.
SRP Forged pistons and rods...
SRP pistons part number is 139631, inverted dome pistons. For forced induction motors.
4.020 bore/3.480 stroke/5.700 rod.....more here.
Only issue can be seen in the pictures below. Some of the piston skirts have light scratches. Not effecting performance at all. And one piston has a few tiny indentions from what appears to be some very small metal. This will also not effect performance at all. These are $600 pistons. Can let them go for $175 shipped.
Summit Racing's Pro Light I-beam connecting rods. 5.700" 4340 forged I-beam. These are no longer made and are some of the best rods they every had made for them. Rumored they were from Scat. Best match on Summit now is there stage II rods at around four bills. Can do $150 shipped on these. Perfect shape.
The pistons and rods are balanced together and numbered. If sold together as a set, it will help you out and I will let them go for $300 shipped fo the entire set. Set is sold pending payment.
PM me please.
Mav
Last edited by MadMav; 06-25-2012 at 10:25 PM.
06-14-2012, 08:37 PM
#3
Registered User
Thread Starter
Join Date: Apr 2002
Location: Colorado Springs
Posts: 259
Re: Ported LT4 heads/intake...Forged pistons/rods for sale
To answer a few pms, I do have a few cams for sale too.
One used Comp Cams 266 Hydraulic Roller Camshaft, 210 / 220, .500 / .510 114 LSA. Great shape.
Two Comp Cams "Extreme" LT1 Camshaft, 224 / 236, .502 / .520 114 LSA
One used, one new.
$125 used, $250 for new.
Mav
One used Comp Cams 266 Hydraulic Roller Camshaft, 210 / 220, .500 / .510 114 LSA. Great shape.
Two Comp Cams "Extreme" LT1 Camshaft, 224 / 236, .502 / .520 114 LSA
One used, one new.
$125 used, $250 for new.
Mav
Last edited by MadMav; 06-16-2012 at 06:04 PM.
06-14-2012, 08:44 PM
#4
Registered User
Join Date: Feb 2012
Location: Lacey,Washington
Posts: 20
Sent from my DROID RAZR using Tapatalk 2
06-14-2012, 08:58 PM
#5
Registered User
Thread Starter
Join Date: Apr 2002
Location: Colorado Springs
Posts: 259
Re: Ported LT4 heads/intake...Forged pistons/rods for sale
Sorry, I meant, $150, but for you I will do $100 + shipping because that's what I put at first. Here are some pics. Less than 5k miles from what I was told.
PM me.
Mav
PM me.
Mav
Last edited by MadMav; 06-14-2012 at 09:00 PM.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
10-31-2016 11:09 AM
95chwagon
Parts For Sale
4
01-13-2015 09:19 PM