CamaroZ28.Com Message Board - Performance/Race parts for sale

GET IN NOW!!! ALMOST GONE!!!!

I am neck deep in the rebuilding of the car this off season. We are taking the old parts off the car left and right as we speak. I will update this list as time goes on/parts become available, so keep on coming back!

ALL PARTS READY TO BE SOLD OFF:

$1500 --LT1 Race Short Block. Put down 465 RWHP
--S&S Automotive designed, blueprinted, balanced 383 CI motor using light weight Scat Forged Rods and Crankshaft and JE Gas Ported Pistons.
--The block has been worked over for better oiling and screened. Will need new rings and bearings.

$100 --Custom Parallel Fuel Rails. -6 fittings welded on both rear rails and -6 return welded on the crossover. Clear Annodized.

$100 --Quartermaster QM1 Throwout Bearing. Rebuilt 4 races ago.

$90 --Two brand new sets of HB112M.540 Hawk Black rear pad sets (price is each--$127 at Jegs)

$20 --Spare late model Optispark (unknown usage but working)

$20 --Spare used LT1 early water pump

$20 --Stock 1994 front crossmember (slightly modified for longtube header clearance.

$10 --Used stock power steering pump

$10 --Spare stock torque arm and front trans mount (slightly modified for exhaust clearance)

SOLD $2500 --Ai top end: heads, cam, Jesel rockers, lifters, pushrods, etc. Refresh from Phil to like new approximately $500
--Advanced Induction CNC ported the heads/200cc’s/solid roller set up/Jessel shaft mounted rockers/matched cam

SOLD$1300 --1994 T-56 Viperized with steel shift forks and billet syncro keys...VERY stout tranny

SOLD$650 --1994 10 bolt rear end cambered and toe added/newer Blaine axles/3.90/T2R/newer brakes (semi spoken for)

SOLD$200 --Custom front accessory bracket to relocate alternator for valve adjustments.
--Stock modified accessories bracket modified for removing AC and moving alternator down.
--Powder coated in silver/black vein
--Smaller Buick alternator with all the brackets, bolts, pulleys and belts to make it work

SOLD $300 --UMI LT1 Road Race Front Crossmember (powder coated black crinkle finish). Used for 16 or so races.

SOLD$200 --LGM Torque Arm. No longer made I don't believe. Have the arm and 2 bearing trans mounts

SOLD$200 --Holley 58mm Throttle Body. Used for 2 seasons....good shape.

SOLD$175 --Used Dynatech 1 3/4" Longtubes. Good condition, ceramic coated--some oil spill marks on the passenger side.

SOLD $175 --Set of Lucas 42lb Injectors. Used for 20 or so races.

SOLD$150 --Canton LT1 Road Race Pan. Part number 15-242T. ($289 at Summit)

SOLD$150 --Pro 5 Shifter with Lou's Short Stick and Blainefab delrin shift lever

SOLD$150 --Custom Aluminum Driveshaft--3 1/2" diameter

SOLD$125 --Moroso 3 quart Accusump. Manual valve/mounts/check valve

SOLD$100 --All Star adjustable spring perches and 400 lb. Suspension Systems springs (perfect for UE lowered PHB)

SOLD$50 --Spare LT1 OBD 1 PCM. 1994 M6

SOLD$40 --Spare early model Optispark (7 race weekends of use only)

SOLD $100 --Turn One Power Steering pump. (as seen in the accessories photo below)

SOLD $175 --Yellow Powder Coated Ported Intake Manifold
--Street/Strip port from Advanced Induction
--Bright Yellow Powder Coating

I will keep adding more as we unbolt stuff and clean out the trailer.......stay tuned! :cool2:

All prices are negotiable....some of these I had to pull out of my rear as I can't find comps for them......let me know.....

All prices are updated. :cool2: