Parting out my car TONS of stuff inside: 12bolt, Stage III LT4s, street twin, Strim..
#1
Parting out my car TONS of stuff inside: 12bolt, Stage III LT4s, street twin, Strim..
Click here for detailed list
--------------------------------------------------------------------------------
specs on the heads (should justify the price tag)
these are stage III ported LT4 castings, come with matching LT4 intake also ported and opened up fot 58mm throttle body
the heads flow as follows
lift Int Exh
100 74 51
200 144 113
300 206 161
400 253 193
500 281 214
600 301 227
700 309 235
they have 52cc combustion chambers, 2.055 / 1.6 valves, .700 lift K motion springs with titanium retainers and 10 degree locks. these heads are nothing short of the BEST. if u got a custom cam to make use of the lift and some cubes to pull air thru them, u'll make SERIOUS NA hp with these... just make sure to get a custom cam .. no off the shelf cam is suitable for these heads (unless its a GM 847 with monster lift)
heres some pictures of them
http://www.sfu.ca/~pkavousi/Heads/
--------------------------------------------------------------------------------
12 bolt ... well its $2600 straight from tbyrne. mine has a bunch of upgrades such as a forged pinion yoke ($250cdn i paid for it), Spohn relocation brackets ($150cdn said and done) and longer wheel studs ($100cdn). it will also have a rerbuilt posi with upgraded clutch packs and ur choice of gears unless u want the spool and 4.11s that are currently in there
--------------------------------------------------------------------------------
S trim, its got VERY low miles on it, all polished, complete (less the inline pump) and comes with a free engine oil cooler
http://www.sfu.ca/~pkavousi/Strim%20001.jpg
http://www.sfu.ca/~pkavousi/Strim%20002.jpg
http://www.sfu.ca/~pkavousi/Parts%20011.jpg
--------------------------------------------------------------------------------
Corbeau steats
also in mint shape, come with brackets
http://www.sfu.ca/~pkavousi/Corbeau/Parts%20007.jpg
http://www.sfu.ca/~pkavousi/Corbeau/Parts%20008.jpg
http://www.sfu.ca/~pkavousi/Corbeau/Parts%20009.jpg
--------------------------------------------------------------------------------
Prostars and slicks
rears are 15x10 with 6.5 BS they are screwed for tubes and slick screws
tires are 28x10.5x15 ET drags with tubes lotsa life left (car bogged dumping the clutch on a 2step at 5000 rpm on a 100 shot, ran a 1.8 60.. thats how good they hook)
fronts are 15x3.5 1" BS they have spacers and 165 60r15 tires
heres the pics
http://www.sfu.ca/~pkavousi/Prostars/
im looking to buy all stock replacements for these parts .. so let me know what u got
all parts are + shipping unless we negotiate
ps. SFB stands for spoken for by
and please dont swarm my pm box, EMAIL ME
--------------------------------------------------------------------------------
specs on the heads (should justify the price tag)
these are stage III ported LT4 castings, come with matching LT4 intake also ported and opened up fot 58mm throttle body
the heads flow as follows
lift Int Exh
100 74 51
200 144 113
300 206 161
400 253 193
500 281 214
600 301 227
700 309 235
they have 52cc combustion chambers, 2.055 / 1.6 valves, .700 lift K motion springs with titanium retainers and 10 degree locks. these heads are nothing short of the BEST. if u got a custom cam to make use of the lift and some cubes to pull air thru them, u'll make SERIOUS NA hp with these... just make sure to get a custom cam .. no off the shelf cam is suitable for these heads (unless its a GM 847 with monster lift)
heres some pictures of them
http://www.sfu.ca/~pkavousi/Heads/
--------------------------------------------------------------------------------
12 bolt ... well its $2600 straight from tbyrne. mine has a bunch of upgrades such as a forged pinion yoke ($250cdn i paid for it), Spohn relocation brackets ($150cdn said and done) and longer wheel studs ($100cdn). it will also have a rerbuilt posi with upgraded clutch packs and ur choice of gears unless u want the spool and 4.11s that are currently in there
--------------------------------------------------------------------------------
S trim, its got VERY low miles on it, all polished, complete (less the inline pump) and comes with a free engine oil cooler
http://www.sfu.ca/~pkavousi/Strim%20001.jpg
http://www.sfu.ca/~pkavousi/Strim%20002.jpg
http://www.sfu.ca/~pkavousi/Parts%20011.jpg
--------------------------------------------------------------------------------
Corbeau steats
also in mint shape, come with brackets
http://www.sfu.ca/~pkavousi/Corbeau/Parts%20007.jpg
http://www.sfu.ca/~pkavousi/Corbeau/Parts%20008.jpg
http://www.sfu.ca/~pkavousi/Corbeau/Parts%20009.jpg
--------------------------------------------------------------------------------
Prostars and slicks
rears are 15x10 with 6.5 BS they are screwed for tubes and slick screws
tires are 28x10.5x15 ET drags with tubes lotsa life left (car bogged dumping the clutch on a 2step at 5000 rpm on a 100 shot, ran a 1.8 60.. thats how good they hook)
fronts are 15x3.5 1" BS they have spacers and 165 60r15 tires
heres the pics
http://www.sfu.ca/~pkavousi/Prostars/
im looking to buy all stock replacements for these parts .. so let me know what u got
all parts are + shipping unless we negotiate
ps. SFB stands for spoken for by
and please dont swarm my pm box, EMAIL ME
Last edited by sideways_Into_3rd; 11-04-2003 at 05:49 PM.
#2
I'd love the heads and intake, but seems a bit expensive for LT4 parts... what else is done to them?
and would you trade your 12 bolt rear for mine from my SS? it has the torsen rear end. I know its a long shot, but worth a try.
and would you trade your 12 bolt rear for mine from my SS? it has the torsen rear end. I know its a long shot, but worth a try.
#4
Ok, thats why the cost, makes sence.
I'm still interested in the LT4 heads/intake, do they come with RR's? like can I just bolt them up?
Being that your are in Canada too is a HUGE plus.
I'm still interested in the LT4 heads/intake, do they come with RR's? like can I just bolt them up?
Being that your are in Canada too is a HUGE plus.
#5
the RRs are extra .. but i have everything u need to just bolt them up .. they are listed with a price .. i'll give u a set of LPE pushrods if u buy the heads and rockers for free
being in canada means u dont have to pay thru the nose for brokrage and taxes i know
being in canada means u dont have to pay thru the nose for brokrage and taxes i know
#14
Frans96SS: the fronts come with tires, yes... the rears i separated since it was hard to sell them together.. all the prices are listed on my list .. i might go halfers on shipping if its too much since im in canada
9secbird: i might have found wheels locally .. but if ur willing to buy the prostars with the slicks i'll give u first dibs
bigde4u: all prices are + shipping .. or im willing to negotiate on the shipping part to go halfers or partial shipping ...
9secbird: i might have found wheels locally .. but if ur willing to buy the prostars with the slicks i'll give u first dibs
bigde4u: all prices are + shipping .. or im willing to negotiate on the shipping part to go halfers or partial shipping ...