Parting Out 98 Z28
Thread Starter
Registered User
Joined: Oct 1999
Posts: 160
From: Pearland,TX, USA
Parting Out 98 Z28
Posting this For a friend, Please send requests to nrhutson@yahoo.com Thank You!
Motor must be sold before any other parts go.
Every part will be for sell except for hood front bumper and pas. fender because of wreck.
Here is the list:
1998 CAMARO Z28
Fully loaded T-Tops,Auto,75,000miles
Black on tan leather interior
(MOTOR)
5.7 Liter V8
21,000 miles on motor
comp. cam,comp. lifters,comp.springs,
port & polished heads,ported intake,
hooker long tube headers, custom 3” Y pipe,
flowmaster muffler,3”cut out,
high volume oil pump,MTI air lid,K&N filter,
polished mass air ends,energy susp. Solid mounts,
underdrive crank pulley,O2 simulators,160 thermostat,
38 lb. Injectors,Hypertech power programer
all free mods done as well.
(TRANSMISSION)
4L60E Hydromatic
13 vein pump,3”kevlar band,
coleen steels,blue plate clutches,
29 element borg warner planitaries,
borg warner sprags,transgo shift kit,
aftermarket selenoids and servo,
aluminum accumulator,energy susp. Mount,
B&M transmission cooler,
Hotchkis sub frame connectors
TRANS. Has 240 miles on rebuild.
Posting this For a friend, Please send requests to nrhutson@yahoo.com Thank You!
Motor must be sold before any other parts go.
Every part will be for sell except for hood front bumper and pas. fender because of wreck.
Here is the list:
1998 CAMARO Z28
Fully loaded T-Tops,Auto,75,000miles
Black on tan leather interior
(MOTOR)
5.7 Liter V8
21,000 miles on motor
comp. cam,comp. lifters,comp.springs,
port & polished heads,ported intake,
hooker long tube headers, custom 3” Y pipe,
flowmaster muffler,3”cut out,
high volume oil pump,MTI air lid,K&N filter,
polished mass air ends,energy susp. Solid mounts,
underdrive crank pulley,O2 simulators,160 thermostat,
38 lb. Injectors,Hypertech power programer
all free mods done as well.
(TRANSMISSION)
4L60E Hydromatic
13 vein pump,3”kevlar band,
coleen steels,blue plate clutches,
29 element borg warner planitaries,
borg warner sprags,transgo shift kit,
aftermarket selenoids and servo,
aluminum accumulator,energy susp. Mount,
B&M transmission cooler,
Hotchkis sub frame connectors
TRANS. Has 240 miles on rebuild.
Posting this For a friend, Please send requests to nrhutson@yahoo.com Thank You!
Thread Starter
Registered User
Joined: Oct 1999
Posts: 160
From: Pearland,TX, USA
** Update **
Neil is planning on getting the car back this week. He wants $3000 for the motor and tranny as a combo. He will seperate the two but you will have to discuss prices with him.
The complete car will be parted out!!
Complete rearend with 3.42 gears.
Complete Brakes
Hypertech Power Programer for 1998 LS1 (has been set back to like new so it can be used by someone else)
Doors with windows
Leather Tan interior
T-tops
Rear hatch with glass
Front windshield
Dash
Air bags
Body parts
Interior panels
Everything!!
E-mail Neil nrhutson@yahoo.com with your needs.
Neil is planning on getting the car back this week. He wants $3000 for the motor and tranny as a combo. He will seperate the two but you will have to discuss prices with him.
The complete car will be parted out!!
Complete rearend with 3.42 gears.
Complete Brakes
Hypertech Power Programer for 1998 LS1 (has been set back to like new so it can be used by someone else)
Doors with windows
Leather Tan interior
T-tops
Rear hatch with glass
Front windshield
Dash
Air bags
Body parts
Interior panels
Everything!!
E-mail Neil nrhutson@yahoo.com with your needs.
Thread Starter
Registered User
Joined: Oct 1999
Posts: 160
From: Pearland,TX, USA
Thread Starter
Registered User
Joined: Oct 1999
Posts: 160
From: Pearland,TX, USA
Okay guys, Neil got the car back today so these parts are ready to go! Car is in his driveway!
Everything is for sale.
E-mail him with your needs. nrhutson@yahoo.com
Everything is for sale.
E-mail him with your needs. nrhutson@yahoo.com
Thread Starter
Registered User
Joined: Oct 1999
Posts: 160
From: Pearland,TX, USA
I am sorry if it takes him a while to respond.
He has no access to a computer during the day which is why he asked me to post it here for him so the only time he has to check his e-mail is at night so he will get back with you if you sent an e-mail.
Send me your name or your email address, and I will tell him to get back with you on the dash.
He has no access to a computer during the day which is why he asked me to post it here for him so the only time he has to check his e-mail is at night so he will get back with you if you sent an e-mail.
Send me your name or your email address, and I will tell him to get back with you on the dash.
Last edited by ZMEFLY; Dec 5, 2003 at 07:52 AM.
Registered User
Joined: Nov 2001
Posts: 408
From: north carolina
Thread Starter
Registered User
Joined: Oct 1999
Posts: 160
From: Pearland,TX, USA
Originally posted by kingman109
its no prob... ended up having to buy the one on ebay.. but thanx
i just prefer to deal with or through members of the board.
ohh well
its no prob... ended up having to buy the one on ebay.. but thanx
i just prefer to deal with or through members of the board.
ohh well
Registered User
Joined: Jul 2003
Posts: 30
interested in tan leather seats.
email: melike84@honorstudent.net
email: melike84@honorstudent.net
Thread Starter
Registered User
Joined: Oct 1999
Posts: 160
From: Pearland,TX, USA
The console is still for sale it is actually for a 6 speed car, but you can swap the middle peice with an auto if you have one. $130 obo
Also:
Seats tan leather front/back: $350 + shipping
T-tops: $300 + shipping
T-top shades: $50 + shipping
Anything else you can thik of e-mail nrhutson@yahoo.com
Doors
Windshield
Hatch with glass
Front driver fender
Rear peice that says Camaro
What do you need???
Also:
Seats tan leather front/back: $350 + shipping
T-tops: $300 + shipping
T-top shades: $50 + shipping
Anything else you can thik of e-mail nrhutson@yahoo.com
Doors
Windshield
Hatch with glass
Front driver fender
Rear peice that says Camaro
What do you need???