Parting out 94 z28, t56, 383 long block or short block,tb, headers,everything.
10-28-2008, 09:15 PM
#1
Registered User
Thread Starter
Join Date: Feb 2003
Location: Miami beach fl/Daytona beach
Posts: 75
Parting out 94 z28, t56, 383 long block or short block,tb, headers,everything.
I have a 94 running in perfect conditions 383 lt1 fully forged z28 m6.
I will be parting out can't seem to sell the car what im asking for so im saving the rolling chassis selling everything else.
I'm selling cause im moving to us virgin islands and i need to take with me a few bucks to start a new life.
I have paper work for all the parts and labor etc.
Only paypal or cash in person. Will ship.
Engine, either long block full motor or short block. Lt1 97 block machined. Full motor. Ready to be put in. Only has 3559 miles on it barely broken. Dyno the car put down 410rwhp/430 rwtq. Took it once the track, on street tires 2.3 60'ft ran N/A 12.3 at 119 mph. I have dyno sheet but misplaced it also head flow numbers when moved , will look for them. Dynoed at redline performance in port orange Florida, and heads flowed at express in deland , florida. Motor built in edgewater, Florida, by Complete auto repair and Shlack Performance.
- 97 lt1 383 6.3L block painted blue, Cloyes double roller timing chain. New meiling oil pump. New gm847 cam, .575/.595 on 112lsa.
-Eagle forged bottom end kit 383 4340 internal balanced all arp bolts.
-lt1 alum stage II TEA ported heads, 274/225 at .600 3 angle valve job, arp head bolts, manley race valves stock size. Arp studs stock size, 1.6 RR Pro mag comp, comp springs double sprung up to .610 lift, Morel Lifters.
- Red lt1 intake ported matched to heads($100)
- Brand new ac delco vented opti($100)
- new march underdrive pulleys crank and alt($50)
- new 58 mm bbk tb($200)
- new ford motor racing 30lbs injectors 3559 miles ($150)
- Every sensor replaced
-New MAF($50)
- new Lt1 corvette gear reduction starter($100)
- new Meizeire electric water pump almost new only used with this motor.($100) *sold*
- 95 lt1 pcm tuned for motor. m6 redline set at 7000rpm ($50)
- New 160 thermostat
- All pulleys, new belt tensioner, keyed hub, msd blaster coil .
- New poly ureth. motor mounts and tranny mount
Heads- $1100 Shipped
Full motor - $4000 shipped
Short block - $2100 shipped
Long block- $ 2800 shipped
Pro mag Comp RR ($150) shipped
-T56 with only 30k miles on it. With hurst shifter And ram power grip clutch and balanced stock flywheel. $1200 shipped I can throw in an 98-02 m6 center console. Poly urth tranny mount included.
- Alum Drive shaft $120 shipped
- Un coated 1 3/4 Hooker Long tubes great shape ($200) shipped
-Mufflex 3 " mandrel bent y pipe with a 3.5" reducer into a bullet muffler dump. I can take the muffler off if you like($175)
Black leather interior out of a 98 ss camaro Front, rear and door panels ($500) Not sure on shipping great shape
I have pics for everything if interested pm me or email me at Arcedence1@aol.com
Cell 786-376 9573
thanx Remember everything is running right now and installed in a car if really interested let me know so I can start parting out.
I will be parting out can't seem to sell the car what im asking for so im saving the rolling chassis selling everything else.
I'm selling cause im moving to us virgin islands and i need to take with me a few bucks to start a new life.
I have paper work for all the parts and labor etc.
Only paypal or cash in person. Will ship.
Engine, either long block full motor or short block. Lt1 97 block machined. Full motor. Ready to be put in. Only has 3559 miles on it barely broken. Dyno the car put down 410rwhp/430 rwtq. Took it once the track, on street tires 2.3 60'ft ran N/A 12.3 at 119 mph. I have dyno sheet but misplaced it also head flow numbers when moved , will look for them. Dynoed at redline performance in port orange Florida, and heads flowed at express in deland , florida. Motor built in edgewater, Florida, by Complete auto repair and Shlack Performance.
- 97 lt1 383 6.3L block painted blue, Cloyes double roller timing chain. New meiling oil pump. New gm847 cam, .575/.595 on 112lsa.
-Eagle forged bottom end kit 383 4340 internal balanced all arp bolts.
-lt1 alum stage II TEA ported heads, 274/225 at .600 3 angle valve job, arp head bolts, manley race valves stock size. Arp studs stock size, 1.6 RR Pro mag comp, comp springs double sprung up to .610 lift, Morel Lifters.
- Red lt1 intake ported matched to heads($100)
- Brand new ac delco vented opti($100)
- new march underdrive pulleys crank and alt($50)
- new 58 mm bbk tb($200)
- new ford motor racing 30lbs injectors 3559 miles ($150)
- Every sensor replaced
-New MAF($50)
- new Lt1 corvette gear reduction starter($100)
- new Meizeire electric water pump almost new only used with this motor.($100) *sold*
- 95 lt1 pcm tuned for motor. m6 redline set at 7000rpm ($50)
- New 160 thermostat
- All pulleys, new belt tensioner, keyed hub, msd blaster coil .
- New poly ureth. motor mounts and tranny mount
Heads- $1100 Shipped
Full motor - $4000 shipped
Short block - $2100 shipped
Long block- $ 2800 shipped
Pro mag Comp RR ($150) shipped
-T56 with only 30k miles on it. With hurst shifter And ram power grip clutch and balanced stock flywheel. $1200 shipped I can throw in an 98-02 m6 center console. Poly urth tranny mount included.
- Alum Drive shaft $120 shipped
- Un coated 1 3/4 Hooker Long tubes great shape ($200) shipped
-Mufflex 3 " mandrel bent y pipe with a 3.5" reducer into a bullet muffler dump. I can take the muffler off if you like($175)
Black leather interior out of a 98 ss camaro Front, rear and door panels ($500) Not sure on shipping great shape
I have pics for everything if interested pm me or email me at Arcedence1@aol.com
Cell 786-376 9573
thanx Remember everything is running right now and installed in a car if really interested let me know so I can start parting out.
Last edited by Z28sky; 11-11-2008 at 05:23 PM.
10-29-2008, 08:51 AM
#5
Registered User
Join Date: Jul 2001
Location: Toronto, Ontario, Canada
Posts: 721
I need 93-96 Camaro central console lead (opens from the front)
Any condition of the top part as long as the hinges are in the good shape
Please PM or email at catsnet1975@yahoo.ca along with the shipping price to Toronto, Canada
Thanks
Alex
Any condition of the top part as long as the hinges are in the good shape
Please PM or email at catsnet1975@yahoo.ca along with the shipping price to Toronto, Canada
Thanks
Alex
10-29-2008, 11:49 AM
#7
Registered User
Thread Starter
Join Date: Feb 2003
Location: Miami beach fl/Daytona beach
Posts: 75
If someone wants the motor with the opti im selling with if i sell the motor not with the opti i will sell the opti alone yes
No i have the 98-02 ls1 console alot better. Opens from the sides, extra cup holders, cig ligthers etc
No i have the 98-02 ls1 console alot better. Opens from the sides, extra cup holders, cig ligthers etc
11-02-2008, 07:47 AM
#10
Registered User
Join Date: Mar 2002
Location: IL
Posts: 1,290
11-02-2008, 08:15 PM
#11
Registered User
Thread Starter
Join Date: Feb 2003
Location: Miami beach fl/Daytona beach
Posts: 75
They are JE Forged Pistons, Flat Tops -5cc , 3559 miles on the motor, 2 bolt main. I have all receipts for the bottom end etc. Located in Daytona Beach , Florida 32114 with stock head gasket size and the block not decked and stock 58cc chambers you get 11:8:1 compression runs great with 93 octane.
11-03-2008, 02:28 PM
#12
Registered User
Join Date: Feb 2008
Location: Kansas
Posts: 90
parting out 94 camaro
interested in the passenger switch panel as long as its black (called you on November 3rd), email is mgwaltney@mccks.edu, thanks.
- Mike
- Mike
