I sold my 388 n building an lsx block 454 with twin 76s so all my lt stuff is for sale all prices are plus shipping
Edelbrock single plane sbc victor e intake converted to lt1 bolt pattern
4150 1000cfm edelbrock throttle body
Edelbrock fuel rails with -6 fittings
42 lb svo injectors $1200
Ice ignition billet 3 wire Hall effect distributor $250
Gm vented opti with msd cap and rotor $175
Taylor 8mm wires
Ati balancer with arp bolt $300
Stock balancer hub drilled and key way cut with bolt (97) $75
Stock balancer and under drive pulleys and belt $75
Hooker 1 3/4 long tubes stainless works 3 inch y pipe and stainless works cutout $400
Csr electric water pump in factory housing $150
Mega squirt spectra ems pro and main harness (not wired for lt1 just main harness) $350
Lt1edit obd2 cable and software and 97 ECM it is locked to $400
97 lt1 6 speed harness .. Idk what it's worth not cut up
97 lt1 t56 with steal 3-4 fork, bronze shift pads, carbon blocker rings, micronited 2nd gear, new 3-4 synchro, stainless shift pads $1700
Spec stage 3+ clutch and pressure plate 500 miles on it SOLD
Lt1 t56 INTERNALLY BALANCED Gm Flywheel $100
Gm clutch slave and master cylinder $100
Slp ss air box and slp rechargeable filter $300
eBay metal intake elbow with nitrous bung $50
8 stock injectors SOLD
15x10 pro stars with 275-50-15 mt drag radials 30% life $400
Power steering pump , ac compressor, idler pulley, alternator, air pump, egr valve, yada yada make an offer
I'll add more later and I have pictures text me if you don't get me here first
615 397 nine 787
Everything plus shipping from Nashville tn area
Open to some trades lsx tall deck block, weld rts's , alumastar, kirky seats, good ls heads, turbos, 2 titanium ls7 rods lol, ls7 crank, ls3 oil pan, what ya got

 

Can you send me some pics of the headers and y pipe please? Cellardoor85@Gmail.com

 

Also interested in the clutch kit. Does it include the tool and TO bearing?

 

i'll post a pic of the headers and y
clutch is pending sale

 

 

 

Ok thanks for the pics. Let me know if the clutch deal falls through. I would definitely take that off your hands.

 

Clutch is sold

 

How many miles on the alternator? Does it make any bearing noise?

 

the car has 120k i think i've replaced it once but i don't remember. it doesn't make any noise

 

You wouldn't have any roller rockers by chance wasnt sure how you sold motor. Sb/Lb...figured I'd ask

 

I am going to PM you about the damper

 

No rockers sold my engine intake to oil pan
I'll check my pm's

 

stock injectors sold clutch sold

 

Hey I finally installed that clutch I bought from you..

Total fubar junk!!

One of the disc springs is broke and 3 fingers on pp are bent 2 really bad

I see you never visit here unless you are selling junk but atleast the members will see this

And btw I did text you since you won't pick up about the condition of this

Regards

Art