LT1 Perf Parts: Ported heads, rockers, BBK TB etc...
 

FOR SALE:
Some LT1 performance engine parts I have left over after building a more aggressive combination. Everything works great and came off a good running engine. This combo went a best of 12.5 @ 110mph w/2.0 60ft, full weight, M6 1996 Trans Am with a Comp Cams 305 cam. There is maybe 10,000 miles on the parts below and in good condition

• Ported LT1 Cylinder Heads by Richmond Race engines in Surrey BC Canada. Richmond Engines . Comes with Comp double valve springs, 2” & 1.56” Valves w/3 angle valve job, no guide plates - $650 - sold
• Stock 1996 LT1 intake – not ported - $70 LOWERED PRICE
• Crane Cam "gold" 1.6 self-aligning roller rockers w/poly locks - $215 LOWERED PRICE
• Comp Cams “R” Lifters - $80 - sold
• Hardened push rods – stock length - $50 - sold
• BBK 52mm throttle body - $175 - sold
• OBD1 ECU for LT1 - $75 LOWERED PRICE
• OEM “Ram Air” cold air kit w/new K&N filter - $265 - sold
• Used OPTI – stock 1996 – open to offers
• 1996 LT1 Mass Air Flow Sensor – open to offers
• 1996 LT1 timing cover – open to offers - sold
• 4.30 Ring & Pinion for a Ford 9” rear end - $85

Prices do not include shipping. Although I live in Canada, I’m not far from Montana, so I could ship out of that location if I get the right money for my parts….Prices are OBO and PM me for any questions or additional pics.

Edit - link to some photos http://ls1tech.com/forums/parts-clas...l#post18583293
Thanks,
Andrew

Re: LT1 Perf Parts: Ported heads, rockers, BBK TB etc...
 

200 shipped for the 52mm TB and the timing cover. I will require pictures

Re: LT1 Perf Parts: Ported heads, rockers, BBK TB etc...
 

Pm sent....I'll get you some photos as well

Re: LT1 Perf Parts: Ported heads, rockers, BBK TB etc...
 

Bump

Re: LT1 Perf Parts: Ported heads, rockers, BBK TB etc...
 

Sold the ram air box and timing cover...

Re: LT1 Perf Parts: Ported heads, rockers, BBK TB etc...
 

Bump....sold the ported heads :)

Lots of good parts left!

Re: LT1 Perf Parts: Ported heads, rockers, BBK TB etc...
 

Sold the lifters and push rods...

Someone has got to want that BBK TB and rockers?! :P

Prices dropped on a couple items so they move

Re: LT1 Perf Parts: Ported heads, rockers, BBK TB etc...
 

Pending sale on the TB...TTT

Re: LT1 Perf Parts: Ported heads, rockers, BBK TB etc...
 

Do you have a part number for the rockers? Are they for a 3/8 or 7/16 stud? Thanks, Nick.

Re: LT1 Perf Parts: Ported heads, rockers, BBK TB etc...
 

Not sure on the part number but they are stamped with 10-1.60 on the first line and c-02 on the 2nd. Also I made a mistake - I thought they were comp brand but they're actually Crane Cams brand and gold color.

Not sure of the stud size but they were ordered to work with bone stock LT1 heads of that helps.

Re: LT1 Perf Parts: Ported heads, rockers, BBK TB etc...
 

Ok they appear to be nsa as opposed to sa. The tip seems to be a smooth roller surface (nsa).

Re: LT1 Perf Parts: Ported heads, rockers, BBK TB etc...
 

They're definitely self aligning...if you PM me an email address I can send you some detailed photos.

Re: LT1 Perf Parts: Ported heads, rockers, BBK TB etc...
 

That would be great! Cellardoor85@Gmail.com thanks.

Re: LT1 Perf Parts: Ported heads, rockers, BBK TB etc...
 

Email sent sir

Re: LT1 Perf Parts: Ported heads, rockers, BBK TB etc...
 

Lowered prices on the roller rockers, intake and OBD1