LT1 AFR 227cc CNC Race Port Heads, T&D, Crower Lifters, Single Plane
05-17-2012, 08:37 AM
#1
Registered User
Thread Starter
Join Date: Nov 2007
Location: DFW Tx
Posts: 166
LT1 AFR 227cc CNC Race Port Heads, T&D, Crower Lifters, Single Plane
UPDATED 06/03
Package Deals
AFR's + T&D Shaftmounts = $1950 shipped obo
AFR's + T&D Shaftmounts + Cam = $2100 shipped obo
AFR's + Vic-E + T&D Shaftmounts + Cam + Crower lifters = $2500 +shipping
(pushrods come free with this package)
Block + pistons = $750+shipping
__________________________________________________ ______________
Some quality parts for a serious setup right here. Im trying to fund another project, nothing wrong with any of these parts, worked flawlessly. Would rather sell the heads, intake, and rockers together. They are made to work with each other.
LT1 block, zero deck, .060 bore, 4bolt splayed billet caps, no hardfill, no issues. Ive got about $1200 in block work. $600
Also have a set of JE -14cc pistons setup for this block. 10.8-1cr with 60cc heads. These were 800$ pistons new. $450
LT1 ARP Headstuds - $125 SOLD
LT4 style AFR 227cc heads, CNC ported with the Race port job by AFR. This is a solid roller setup, springs are good to .650. The heads were converted to run a SBC bolt pattern intake. Port matched to the single plane Vic E I have for sale or have your own carbed intake matched and go to town. 60cc chambers. $1500+shipping
Edelbrock Fuel Rails $100+shipping
Solid Roller cam that was ran with the AFR heads 110 LSA $250+shipping
- Cam went 6.1x-6.2x 1/8mi in this motor with more left
Shaftmount T&D 1.6 ratio rocker arm setup. $525 +shipping
SR Crower SD lifters, some of the best lifters you can buy. $350+shipping
Single Plane Vic-E, powdercoated 'chrome', water neck is welded as well as the rear distributor hole. Powdercoating has a few nicks in it but overall looks great on the motor. This intake is port matched to the AFR heads above. $450+shipping
Comp hardened 3/8ths pushrods, the big ones. Stock length. $100+shipping
Aarons sheetmetal elbow. $125 SOLD
AS&M 58mm TB, brand new IAC sensor in it. $325 all sensors included SOLD
Package Deals
AFR's + T&D Shaftmounts = $1950 shipped obo
AFR's + T&D Shaftmounts + Cam = $2100 shipped obo
AFR's + Vic-E + T&D Shaftmounts + Cam + Crower lifters = $2500 +shipping
(pushrods come free with this package)
Block + pistons = $750+shipping
__________________________________________________ ______________
Some quality parts for a serious setup right here. Im trying to fund another project, nothing wrong with any of these parts, worked flawlessly. Would rather sell the heads, intake, and rockers together. They are made to work with each other.
LT1 block, zero deck, .060 bore, 4bolt splayed billet caps, no hardfill, no issues. Ive got about $1200 in block work. $600
Also have a set of JE -14cc pistons setup for this block. 10.8-1cr with 60cc heads. These were 800$ pistons new. $450
LT1 ARP Headstuds - $125 SOLD
LT4 style AFR 227cc heads, CNC ported with the Race port job by AFR. This is a solid roller setup, springs are good to .650. The heads were converted to run a SBC bolt pattern intake. Port matched to the single plane Vic E I have for sale or have your own carbed intake matched and go to town. 60cc chambers. $1500+shipping
Edelbrock Fuel Rails $100+shipping
Solid Roller cam that was ran with the AFR heads 110 LSA $250+shipping
- Cam went 6.1x-6.2x 1/8mi in this motor with more left
Shaftmount T&D 1.6 ratio rocker arm setup. $525 +shipping
SR Crower SD lifters, some of the best lifters you can buy. $350+shipping
Single Plane Vic-E, powdercoated 'chrome', water neck is welded as well as the rear distributor hole. Powdercoating has a few nicks in it but overall looks great on the motor. This intake is port matched to the AFR heads above. $450+shipping
Comp hardened 3/8ths pushrods, the big ones. Stock length. $100+shipping
Aarons sheetmetal elbow. $125 SOLD
AS&M 58mm TB, brand new IAC sensor in it. $325 all sensors included SOLD
Last edited by Stroked96Bowtie; 06-03-2012 at 08:23 AM.
05-21-2012, 12:46 PM
#4
Registered User
Thread Starter
Join Date: Nov 2007
Location: DFW Tx
Posts: 166
06-03-2012, 08:23 AM
#15
Registered User
Thread Starter
Join Date: Nov 2007
Location: DFW Tx
Posts: 166
Re: LT1 AFR 227cc CNC Race Port Heads, T&D, Crower Lifters, Single Plane
Sheetmetal elbow sold, added edlebrock fuel rails, update package deals with reduced prices for package purchases. Thanks cz28.com!
