LS6 Heads off an 04 Z06, 243 Casting, engine they came off of hydrolocked, so it bent two valves on one cylinder, the intake valve broke off clean, the exhuast valve is bent slightly, havent taken the exhuast valve off but I did take the intake off, there is a SMALL pit in the chamber right by the valve seat, the guide looks okay but Im not a machinist. They probably just need a valve job. They came off of a low milage car and havent been been ported or anything and come with seals. Heads and valves are Sold!

Knock Sensors out of an 04 Z06, Sold!

Rockers and Pedastils off of an 04 Z06, low milage, Sold!

Roller Lifters and Cups off of an 04 Z06, low milage, Sold!

Rear Cover with seal, Sold!

Mobil 1 Oil Filler Cap off of 04 Z06, Sold!

82-02 Flowmaster 80 Series Muffler, has a little extra piping that can be cutoff when it is welded in, Sold!

BBK 80mm LS1 F-Body Throttlebody, might fit trucks too, not sure, it has been minorly ported to clean up the casting flash, it has a hole drilled in it for a big cam car, it's missing the spacer but can still be installed if you modify the tb bracket or you can get the spacer seperate probably, modifications not needed on a 98-99 car. It's less than a couple months old, would match up nicely with an LSX 78mm Intake, these are almost $400 new, $205 shipped http://img.photobucket.com/albums/v6...erm1/BBKTB.jpg
http://img.photobucket.com/albums/v6...kerm1/BBK2.jpg
http://img.photobucket.com/albums/v6...kerm1/BBK3.jpg

SS/WS6 Tips, rolled slash cut polished tips, they have plenty of extra pipe still attached to them that can be cutoff when they are installed if you dont need it, $15 shipped
http://img.photobucket.com/albums/v6...rm1/SSTips.jpg
http://img.photobucket.com/albums/v6...m1/SSTips2.jpg

Kenwood Excelon KCD X615 CD Player, 45Wx4, manual flip MASK face, trim bezel dosent stay on very tight but it has it, Sold!

LT1 OBD1 6 Speed PCM out of a wrecked 95 TransAm, Sold!

Valve Covers off of an 04 Z06, includes all bolts and they still have gaskets, Sold!

I am PayPal Verified and Confirmed, have 154 positive feedbacks on Ebay, have sold HUNDREDS of parts on CamaroZ28.com and have sold some parts on other boards.

 

Rockers, lifters and rear cover sold!

 

Knock Sensors and Mobil 1 Oil Cap sold!

 

CD player is sold!

 

Sir, I'll take that PCM !!

Please confirm for the record that it's an OBD 1 95 PCM for a Manual 6 speed Fbody and in proper working condition ......

I will be using Paypal for payment.

P.s. Tried to PM you but your box seems to be full.

Thanks,

 

Sent you a PM.

 

LT1 PCM sold! Thanks Sergio!

 

Heads and Valves are sold!