lots of Lt1 stuff for sale!!!
Thread Starter
Registered User
Joined: Jan 2004
Posts: 137
From: Manitoba, Canada
lots of Lt1 stuff for sale!!!
ok here is a list of what i have for sale. I can get pictures if anyone wants. I dont have enough time to research what the parts are worth so offers will work for now. all parts are off of a 94 Z28.
- Full A/C sytem, pump, lines, condenser, whatever else is part of the A/C system.
- edelbrock headers (black in color)
- fully ported and polished Lt1 heads( not sure on flow numbers but i know they work very well. the heads have comp dual valve springs, titanium seats and retainers, 10 degree locks, stainless steel manley valves (1.98 intake, 1.6 exhaust).
- comp hardened chromoly pushrods, comp pro magnum 1.5 self-aligning full roller rockers, comp high energy lifters
- comp cam XE 230/236 .510-.520 112LSA
All aftermarket stuff has about 5000 miles on it.
- also have the stock cam for the car and all of the stock lifters, pushrods, and rockers.
- stock bottom end ( crank, pistons and rods)
All the factory stuff has 100 000 miles or 160 000 km's
-set of factory ZR1's (not replicas) they are silver. 17x9.5 have almost new mickey thompsons et street radials on back and only like 35% rubber on front all rims are 100% perfect except for one has a little scuffing on part of the very outer edge. can't notice unless you look close.
all of the stuff listed works 100% perfect ,had no problems. the only reason im getting rid of this stuff is because im building a 396 stroker for this car and i no longer need any of these parts anymore.
- Full A/C sytem, pump, lines, condenser, whatever else is part of the A/C system.
- edelbrock headers (black in color)
- fully ported and polished Lt1 heads( not sure on flow numbers but i know they work very well. the heads have comp dual valve springs, titanium seats and retainers, 10 degree locks, stainless steel manley valves (1.98 intake, 1.6 exhaust).
- comp hardened chromoly pushrods, comp pro magnum 1.5 self-aligning full roller rockers, comp high energy lifters
- comp cam XE 230/236 .510-.520 112LSA
All aftermarket stuff has about 5000 miles on it.
- also have the stock cam for the car and all of the stock lifters, pushrods, and rockers.
- stock bottom end ( crank, pistons and rods)
All the factory stuff has 100 000 miles or 160 000 km's
-set of factory ZR1's (not replicas) they are silver. 17x9.5 have almost new mickey thompsons et street radials on back and only like 35% rubber on front all rims are 100% perfect except for one has a little scuffing on part of the very outer edge. can't notice unless you look close.
all of the stuff listed works 100% perfect ,had no problems. the only reason im getting rid of this stuff is because im building a 396 stroker for this car and i no longer need any of these parts anymore.
Last edited by FastZ8; May 24, 2007 at 06:36 PM. Reason: add more stuff
Thread Starter
Registered User
Joined: Jan 2004
Posts: 137
From: Manitoba, Canada
sorry for the long reply guys but i work all day so i can only answer in the evenings. for the A/c stuff im not sure what its worth but if u make me an offer we can definatly work something out im pretty flexible with this stuff.
Thread Starter
Registered User
Joined: Jan 2004
Posts: 137
From: Manitoba, Canada
as for track times i went to the track for the first time last summer it was really hot out and only made 3 passes i think. when i did te passes i had very bald street tires and and no gears ( have 4:11's now) i was trapping about 105 mph. i wasnt pushing the car as hard as i could either(no speed shifting) and was worried about rear end. it worked very well and had really good grunt from the bottom right to the top.
