Im selling a set of stage 2 heads. They were cnc ported by florida cnc then hand blended by Jay from Absdolute speed. Jay also did the valve job. They have manley 2.02 1.57 valves and isky springs. The heads flowed 285 @ 500 and have real strong low and mid #'s Give Jay a call at 1516-987-9392 and ask him about Mike m's heads he has them there right now. they were just totally inspected and are in perfect condition. They were ported for my 216-220 cam. The heads will work perfect smaller cams. I would say up to a 224 cam.
Im asking 1000 for the heads

the cam is a 216-220 .525 .532 on a 114
im asking 250 for the cam.
Ill take 1200 together.

my email is mpsychoss@aol.com I do take paypal.

 

If they flowed 285 why would they only be good with a smaller cam? what castings are they? do you have any pics?

 

if possible send me some pics im interested mhall94@cinci.rr.com

 

They are 241 castings, The reason I say they work well with smaller cams is that the heads have real good low and mid flow #'s.

 

flow #'s are
200 150
300 212
400 254
450 274
500 285
550 290 ex 218

camera is charging ill post pics later.
if interested email me @ mpsychoss@aol.com

 

Are the intake valves 2.20" or 2.02"?

 

i edited it, I really doubt it would have a 2.20 valve They have 2.02 valves