FS: CC502 cam and Scorpion 1.7 rockers
#1
FS: CC502 cam and Scorpion 1.7 rockers
Cam specs: http://www.compcams.com/Technic....7-502-8
Cam (SOLD!) has approximately 4K miles on it. I'm selling it because I need to go to a larger cam with my new setup. $150 takes it.
Scorpion 1.7 RRs (SOLD!): http://www.flatlanderracing.com/scor...s.html#chevySB
Click to see rockers
SCP1025, 1.7 ratio, non-self-aligning (requires guideplates), 3/8" stud, includes complete set of locking rocker nuts. They only have 20 miles on them. I can't use them with my new cam (have to go back to 1.6 rockers). $200 takes them.
NOTE: You'll need 8 GM guideplates (part number 20-14011051 at http://www.thunderracing.com) to use the rockers and ARP rocker studs are highly recommended (part number 113-134-7101, also at Thunder Racing). I'll throw in the set of guideplates that I have now for free. I don't have the rocker studs available, so you'll have to buy your own.
Please email me at jlehn1@cinci.rr.com if you're interested (no PMs please...I never check them). It will probably be a couple of weeks before I can pull the parts from the engine (just FYI). Also, I'm unsure of the weight for both of these items, so I'm going to guesstimate and say $15 for shipping each if you're not local.
Additional note: payment first, product second. I will not ship until I receive payment. Paypal is OK, money order is fine too. Cash is even better if you're local. No personal checks accepted.
Cam (SOLD!) has approximately 4K miles on it. I'm selling it because I need to go to a larger cam with my new setup. $150 takes it.
Scorpion 1.7 RRs (SOLD!): http://www.flatlanderracing.com/scor...s.html#chevySB
Click to see rockers
SCP1025, 1.7 ratio, non-self-aligning (requires guideplates), 3/8" stud, includes complete set of locking rocker nuts. They only have 20 miles on them. I can't use them with my new cam (have to go back to 1.6 rockers). $200 takes them.
NOTE: You'll need 8 GM guideplates (part number 20-14011051 at http://www.thunderracing.com) to use the rockers and ARP rocker studs are highly recommended (part number 113-134-7101, also at Thunder Racing). I'll throw in the set of guideplates that I have now for free. I don't have the rocker studs available, so you'll have to buy your own.
Please email me at jlehn1@cinci.rr.com if you're interested (no PMs please...I never check them). It will probably be a couple of weeks before I can pull the parts from the engine (just FYI). Also, I'm unsure of the weight for both of these items, so I'm going to guesstimate and say $15 for shipping each if you're not local.
Additional note: payment first, product second. I will not ship until I receive payment. Paypal is OK, money order is fine too. Cash is even better if you're local. No personal checks accepted.
Last edited by Type_O_Negative_1320; 03-05-2004 at 10:06 AM.
#2
One more thing...I know it's a long shot, but if you have a CC306 and are looking to step your cam down a bit, I'd be willing to trade the CC502 straight up plus I'll pay shipping both ways.
#3
Also for sale...
Set of Crane OEM hydraulic roller lifters. Worked when pulled...had around 8K miles on them. Had to go to Comp R lifters since my K800s overpowered these lifters. They would be fine under a lighter spring pressure. $80 for the set.
Lifters at Jeg's...part number 270-10530-16
Set of '94 hardened pushrods (SOLD!)...can be used with guideplates. Looked fine when pulled (other than the crap caked on to them...they just need a good cleaning). $10(?) for the set.
Set of Crane OEM hydraulic roller lifters. Worked when pulled...had around 8K miles on them. Had to go to Comp R lifters since my K800s overpowered these lifters. They would be fine under a lighter spring pressure. $80 for the set.
Lifters at Jeg's...part number 270-10530-16
Set of '94 hardened pushrods (SOLD!)...can be used with guideplates. Looked fine when pulled (other than the crap caked on to them...they just need a good cleaning). $10(?) for the set.
Last edited by Type_O_Negative_1320; 03-02-2004 at 11:11 AM.
#4
Originally posted by Type_O_Negative_1320
One more thing...I know it's a long shot, but if you have a CC306 and are looking to step your cam down a bit, I'd be willing to trade the CC502 straight up plus I'll pay shipping both ways.
One more thing...I know it's a long shot, but if you have a CC306 and are looking to step your cam down a bit, I'd be willing to trade the CC502 straight up plus I'll pay shipping both ways.
Thread
Thread Starter
Forum
Replies
Last Post