i have a comp cams part number 08-306-8 for a NON-LT1 hydralic roller...i bought the cam in hopes of working in my lt1 and will not fit...this has the same grind number and specs as "the infamouse 306" for lt1s but is for any non lt1 hydralic roller

$150 shipped

 

Im interested, could you tell me the comp grind/part # so i can check the specs in their catalog[i saw 306 specs but didnt see the exact same one in factory hyd. roller section]--custom grind?thanks.

 

this is straight from their website:

Part Number 08-306-8
Engine -9999 Chevrolet
305ci-350ci
8cyl.
Grind Number CS 290H-R12
Description

Intake Exhaust
Valve Adjustment 0 0
Gross Valve Lift 0.51 0.54
Duration At 0.006 Tappet Lift 290 307

Valve Timing At 0.05
Open Close
Intake 7 43
Exhaust 58 6

These Specs Are For The Cam Installed At 108 Intake CL
Intake Exhaust
Duration At 0.05 230 244
Lobe Lift 0.34 0.36
Lobe Separation 112
Recommended Valve Springs 987-16

this cam has the EXACT SAME specs as the 306 for LT1s

thanks
bubba

 

Ttt

 

thanks for the update man, im looking for a little hotter.Heres a ttt for ya.

 

this has the same lift, duration, etc as the LT1 306 cam but its mad for any NON-LT1 hydralic roller
thanks
bubba

 

Ttt

 

Ttt....

 

ttt