Cheap flt built 4l60e - must go
05-22-2012, 08:22 AM
#1
Registered User
Thread Starter
Join Date: Dec 2005
Posts: 124
Cheap flt built 4l60e - must go
SOLD
Hello,
I am moving in the next month and I dont want to bring this with me. The trans is from my 1994 Z28 and was built by Finish Line Transmissions about 2 years ago. Its their level 3 build.
The trans has about 2k highway cruising miles on it and is basically brand new. My car is only used for summer car shows, and no racing. I converted to a 6 speed and dont need this any more.
Here are the specs from FLTs website. I paid over 1600 for this transmission and it works flawlessly. Also has a B&M aluminum pan for easy fluid changes.
FLT machined performance pump.
Media blast case, bell housing, and tail housing to restore a new aluminum finish. Prep case for assembly.
8 B/W hi-energy clutches w/koleen steels in 3-4 clutch
Seal & gasket kit
Bushing kit
Alto wide 2-4 red lined band with reinforced anchor
Bonded pistons/input drum
Sonnax SmartShell kit w/bearing
Extra Wide Heavy Duty double caged 29 element sprag
4L65 low roller clutch
Corvette servo
New solenoids
New internal wiring harness
New Spacer plate
B/W clutches
Updated aluminum accumulator pistons
FLT calibrated valvebody
Filter
Set end play to FLT specs
Case cooler fittings
Will take $400 cash for it and it must be picked up. LOCATED IN QUEENS, NY.
This is a crazy deal and likely what you would pay at a junk yard for a stock unit.
Do some research on FLT and you will see they are one of the best builders out there.
Thanks for looking. I have pics, so just pm me and I will send them over.
Hello,
I am moving in the next month and I dont want to bring this with me. The trans is from my 1994 Z28 and was built by Finish Line Transmissions about 2 years ago. Its their level 3 build.
The trans has about 2k highway cruising miles on it and is basically brand new. My car is only used for summer car shows, and no racing. I converted to a 6 speed and dont need this any more.
Here are the specs from FLTs website. I paid over 1600 for this transmission and it works flawlessly. Also has a B&M aluminum pan for easy fluid changes.
FLT machined performance pump.
Media blast case, bell housing, and tail housing to restore a new aluminum finish. Prep case for assembly.
8 B/W hi-energy clutches w/koleen steels in 3-4 clutch
Seal & gasket kit
Bushing kit
Alto wide 2-4 red lined band with reinforced anchor
Bonded pistons/input drum
Sonnax SmartShell kit w/bearing
Extra Wide Heavy Duty double caged 29 element sprag
4L65 low roller clutch
Corvette servo
New solenoids
New internal wiring harness
New Spacer plate
B/W clutches
Updated aluminum accumulator pistons
FLT calibrated valvebody
Filter
Set end play to FLT specs
Case cooler fittings
Will take $400 cash for it and it must be picked up. LOCATED IN QUEENS, NY.
This is a crazy deal and likely what you would pay at a junk yard for a stock unit.
Do some research on FLT and you will see they are one of the best builders out there.
Thanks for looking. I have pics, so just pm me and I will send them over.
Last edited by Queens94z28; 05-26-2012 at 12:38 PM. Reason: Sold
05-23-2012, 12:56 PM
#10
Registered User
Thread Starter
Join Date: Dec 2005
Posts: 124
Thread
Thread Starter
Forum
Replies
Last Post
detroitmuscle
Parts For Sale
0
07-31-2015 04:21 AM