cammed 355 z28-1995 six speed
Thread Starter
Registered User
Joined: Dec 2002
Posts: 207
From: johnston city, il
cammed 355 z28-1995 six speed
Ok I'm going to sell the car. Its a 1995 camaro z28 with a manual transmission. Polo green is the color, with 82000 miles on the chassis, about 2500 on the rebuilt engine. The car has a few modifications:
Bored to a 355 (dropped a valve)
Forged Pistons (used the summit bebuild kit)
Ported Heads & Intake (no flow numbers, professionally done)
comp cam 224/230 lope 112
comp cam pro magnum 1.6 roller rockers
comp r lifters
comp dual springs, retainers, etc.
federal mogual rings & bearings
millings hardened pushrods
hooker long tubes
hooker catback
custom y-pipe
msd 8.5mm wires
msd blaster coil
new optispark
new oil pump
lt4 timing chain
new battery
new o2 sensors
new iat sensor
richmond 3:73s
bmr stb
new clutch disc, (bought when converted to 6 speed)
sony cd and kicker substation
tinted windows
2001 firebird wheels with bfg drag radials on the back.
computer was programmed by madwolf
The car has a tiny bit of cam surge, that can be fixed with a dyno tune. For a ten year old car its in good condition, its been ran at a local 1/8th mile track with 9 total passes. I use this car as my daily driver, it gets around 20mpg and very streetable. The reason I'm selling is I want a new car, something more practical.
The car Dyno'd 340 rwhp and 338 rwtq
The car's highest trap speed was 89.4 mph (1/8th), the car has to be making more hp if its running nearly 90mph in the 1/8th mile.
I have all the receipts, and time slips & dyno graphs.
I would like $7500
I'll post pictures later.
Thanks
Rodney
Bored to a 355 (dropped a valve)
Forged Pistons (used the summit bebuild kit)
Ported Heads & Intake (no flow numbers, professionally done)
comp cam 224/230 lope 112
comp cam pro magnum 1.6 roller rockers
comp r lifters
comp dual springs, retainers, etc.
federal mogual rings & bearings
millings hardened pushrods
hooker long tubes
hooker catback
custom y-pipe
msd 8.5mm wires
msd blaster coil
new optispark
new oil pump
lt4 timing chain
new battery
new o2 sensors
new iat sensor
richmond 3:73s
bmr stb
new clutch disc, (bought when converted to 6 speed)
sony cd and kicker substation
tinted windows
2001 firebird wheels with bfg drag radials on the back.
computer was programmed by madwolf
The car has a tiny bit of cam surge, that can be fixed with a dyno tune. For a ten year old car its in good condition, its been ran at a local 1/8th mile track with 9 total passes. I use this car as my daily driver, it gets around 20mpg and very streetable. The reason I'm selling is I want a new car, something more practical.
The car Dyno'd 340 rwhp and 338 rwtq
The car's highest trap speed was 89.4 mph (1/8th), the car has to be making more hp if its running nearly 90mph in the 1/8th mile.
I have all the receipts, and time slips & dyno graphs.
I would like $7500
I'll post pictures later.
Thanks
Rodney
Last edited by worak; Jun 29, 2004 at 11:35 PM.
Registered User
Joined: Jul 2004
Posts: 63
From: MIDLAND, TX
Re: cammed 355 z28-1995 six speed
I have a 94 camaro v6 3.4 that is pretty practical
-new silver paint job
-18 inch wheels
-ss hood
-firebird interior
-leather seats
heyjsut offering you will probably wont be interested b/c of he v6 but wouldnt hurt to try.
-new silver paint job
-18 inch wheels
-ss hood
-firebird interior
-leather seats
heyjsut offering you will probably wont be interested b/c of he v6 but wouldnt hurt to try.
Thread Starter
Registered User
Joined: Dec 2002
Posts: 207
From: johnston city, il
Re: cammed 355 z28-1995 six speed
Originally Posted by worak
i bought a dakota already i need to get rid of the z, 2 car payments is more than enough right now. thanks for the offer
