![]() |
A Bunch Of Parts
headlight bezels (front and back) sandblasted and painted with eastwood chasis black and silver $20
complete 9 bolt rearend. 3.27 gear, posi is in AMAZING shape. It was removed and inspected and appears to be new it is in such good shape. rearend was professionally sandblasted and por15/painted eastwood chasis black. Include calipers and lines but no rotors. Ring and pinion are also in very good shape. Included is a brand new YUKON 3.70 gear set (retails for $350) and a brand new Master Overhaul Kit from Randy's Ring and Pinion ($150 new). I will aslo include 2 printouts, 1 of complete rebuild procedure of the rearend and the other of many sources to get parts. Asking $650 for all of it iroc steering box, "Z" box quick ratio. professionally sandblasted and painted chasis black $60 93-97 camaro/TA k&N filtercharger intake $150 86 IROC wiper motor, cracked plastic housing $10 89 RS Nose Piece $30 IROC hood louvers, about 2-3 studs broken off back of each $55 vortec centerbolt valve covers, i was told they were carbon fiber but am not positive on that. They are not metal, they are some type of composite plastic i believe. They used to say vortec across top. Bolts included. $40 2 stock torque arms $10 each 305 distributor and coil complete with wires, in good shape $40 700r4 gear selector cable, or whatever it is called $10 700r4 speedo cable $5 RS intake (filter housing, tube, and air vent) $20 drum brake proportioning valve $10 HVAC selector $15 random speedometer pieces, let me know what youre looking for and ill tell you if i have it E-brake handle and mechanism $15 complete set of 89 & up IROC wheels (2 fronts and 2 rears), charcoal gray with goodyear eagle GA tires $400 IROC 36mm sway bar, sandblasted and painted chasis black $40 2" skulte adapters in great shape $250 complete set black 86 IROC seats in good shape $200 rear iroc springs $10 IROC Z28 dash emblem $10 TH350 - C transmission (this C means it has a lockup torque converter). Its been cleaned and ready to go $80 IROC 32mm front sway bar $20 Camaro headlight bar with headlight bezels in great shape, no damage whatsoever $40 89 Camaro t-top bag, in great shape $50 rear pull cover black $25 86 IROC black armrests in great shape $50 89 RS A/C blower motor $15 145mph iroc speedo, in great shape $150 MBA products aluminum hood inserts $60 aluminum gauge pod overlay $20 Make offer on: 3.4 heads, complete, great shape 3.4 coil packs 3.4 intake manifold 3.4 throttle body 3.4 water pump 3.4 exhaust manifolds 3 O2 sensors stock 3.4 elbow 3.4 intake runner with injectors and fuel rail new 3.4 alternator (may be same as LT1, not positive though) LT1/3.4 a/c compressor 3.4 power steering pump and bracket 4l60E transmission from 94 V6 in great shape jointed driveshaft with torque arm 3.4 motor mounts 3.4 oil filter mount EVERYTHING IS OBO Email or PM me for pics |
Re: A Bunch Of Parts
ttt
|
Re: A Bunch Of Parts
Is the th350 in good shape?
what size tailshaft? what size stall? where u located? Calling first dibs |
Re: A Bunch Of Parts
The tranny was in perfectly good working order when removed. Not sure of stall, whatever stock is. Im located in anderson, in. It has the short tail shaft.
|
Re: A Bunch Of Parts
|
Re: A Bunch Of Parts
How much do you want to get for the 4L60E? Do you know if it will work with a 95 LT1?
|
Re: A Bunch Of Parts
What years does the 9" fit. Will it fit in a 95 or is it for a 3rd gen.?
|
Re: A Bunch Of Parts
scyzoryk:
i have it but i dont think im going to sell it. Russ95Z28: im not sure if it will fit the lt1 or not. Im also not sure what its worth, pm me with an offer and well go from there. GetaZforgetGT: It isnt a 9", its a 9 bolt borg warner rear end out of the IROC's. |
Re: A Bunch Of Parts
where are you located? I may be interested in the 9 bolt. I have one with 3.70's already in it. How much for just the 9 bolt?
|
Re: A Bunch Of Parts
Originally Posted by lowbgtrs
GetaZforgetGT: It isnt a 9", its a 9 bolt borg warner rear end out of the IROC's. Thanks for the reply. |
Re: A Bunch Of Parts
87CIZ:
Not sure i will seperate them yet, but it seems inevitable that i will have to. If i do seperate, i would like no lower than $300 due to the cost of the sandblasting and materials. Im located in anderson, in 46013. |
Re: A Bunch Of Parts
bump
|
Re: A Bunch Of Parts
ttt
|
Re: A Bunch Of Parts
to the top
|
Re: A Bunch Of Parts
How much for the 3.4L manifold and TB?
I live in 91010, CA. |
| All times are GMT -5. The time now is 02:31 AM. |
© 2026 MH Sub I, LLC dba Internet Brands