A Bunch Of Parts
Thread Starter
Registered User
Joined: Jan 2005
Posts: 174
A Bunch Of Parts
headlight bezels (front and back) sandblasted and painted with eastwood chasis black and silver $20
complete 9 bolt rearend. 3.27 gear, posi is in AMAZING shape. It was removed and inspected and appears to be new it is in such good shape. rearend was professionally sandblasted and por15/painted eastwood chasis black. Include calipers and lines but no rotors. Ring and pinion are also in very good shape.
Included is a brand new YUKON 3.70 gear set (retails for $350) and a brand new Master Overhaul Kit from Randy's Ring and Pinion ($150 new).
I will aslo include 2 printouts, 1 of complete rebuild procedure of the rearend and the other of many sources to get parts.
Asking $650 for all of it
iroc steering box, "Z" box quick ratio. professionally sandblasted and painted chasis black $60
93-97 camaro/TA k&N filtercharger intake $150
86 IROC wiper motor, cracked plastic housing $10
89 RS Nose Piece $30
IROC hood louvers, about 2-3 studs broken off back of each $55
vortec centerbolt valve covers, i was told they were carbon fiber but am not positive on that. They are not metal, they are some type of composite plastic i believe. They used to say vortec across top. Bolts included. $40
2 stock torque arms $10 each
305 distributor and coil complete with wires, in good shape $40
700r4 gear selector cable, or whatever it is called $10
700r4 speedo cable $5
RS intake (filter housing, tube, and air vent) $20
drum brake proportioning valve $10
HVAC selector $15
random speedometer pieces, let me know what youre looking for and ill tell you if i have it
E-brake handle and mechanism $15
complete set of 89 & up IROC wheels (2 fronts and 2 rears), charcoal gray with goodyear eagle GA tires $400
IROC 36mm sway bar, sandblasted and painted chasis black $40
2" skulte adapters in great shape $250
complete set black 86 IROC seats in good shape $200
rear iroc springs $10
IROC Z28 dash emblem $10
TH350 - C transmission (this C means it has a lockup torque converter). Its been cleaned and ready to go $80
IROC 32mm front sway bar $20
Camaro headlight bar with headlight bezels in great shape, no damage whatsoever $40
89 Camaro t-top bag, in great shape $50
rear pull cover black $25
86 IROC black armrests in great shape $50
89 RS A/C blower motor $15
145mph iroc speedo, in great shape $150
MBA products aluminum hood inserts $60
aluminum gauge pod overlay $20
Make offer on:
3.4 heads, complete, great shape
3.4 coil packs
3.4 intake manifold
3.4 throttle body
3.4 water pump
3.4 exhaust manifolds
3 O2 sensors
stock 3.4 elbow
3.4 intake runner with injectors and fuel rail
new 3.4 alternator (may be same as LT1, not positive though)
LT1/3.4 a/c compressor
3.4 power steering pump and bracket
4l60E transmission from 94 V6 in great shape
jointed driveshaft with torque arm
3.4 motor mounts
3.4 oil filter mount
EVERYTHING IS OBO
Email or PM me for pics
complete 9 bolt rearend. 3.27 gear, posi is in AMAZING shape. It was removed and inspected and appears to be new it is in such good shape. rearend was professionally sandblasted and por15/painted eastwood chasis black. Include calipers and lines but no rotors. Ring and pinion are also in very good shape.
Included is a brand new YUKON 3.70 gear set (retails for $350) and a brand new Master Overhaul Kit from Randy's Ring and Pinion ($150 new).
I will aslo include 2 printouts, 1 of complete rebuild procedure of the rearend and the other of many sources to get parts.
Asking $650 for all of it
iroc steering box, "Z" box quick ratio. professionally sandblasted and painted chasis black $60
93-97 camaro/TA k&N filtercharger intake $150
86 IROC wiper motor, cracked plastic housing $10
89 RS Nose Piece $30
IROC hood louvers, about 2-3 studs broken off back of each $55
vortec centerbolt valve covers, i was told they were carbon fiber but am not positive on that. They are not metal, they are some type of composite plastic i believe. They used to say vortec across top. Bolts included. $40
2 stock torque arms $10 each
305 distributor and coil complete with wires, in good shape $40
700r4 gear selector cable, or whatever it is called $10
700r4 speedo cable $5
RS intake (filter housing, tube, and air vent) $20
drum brake proportioning valve $10
HVAC selector $15
random speedometer pieces, let me know what youre looking for and ill tell you if i have it
E-brake handle and mechanism $15
complete set of 89 & up IROC wheels (2 fronts and 2 rears), charcoal gray with goodyear eagle GA tires $400
IROC 36mm sway bar, sandblasted and painted chasis black $40
2" skulte adapters in great shape $250
complete set black 86 IROC seats in good shape $200
rear iroc springs $10
IROC Z28 dash emblem $10
TH350 - C transmission (this C means it has a lockup torque converter). Its been cleaned and ready to go $80
IROC 32mm front sway bar $20
Camaro headlight bar with headlight bezels in great shape, no damage whatsoever $40
89 Camaro t-top bag, in great shape $50
rear pull cover black $25
86 IROC black armrests in great shape $50
89 RS A/C blower motor $15
145mph iroc speedo, in great shape $150
MBA products aluminum hood inserts $60
aluminum gauge pod overlay $20
Make offer on:
3.4 heads, complete, great shape
3.4 coil packs
3.4 intake manifold
3.4 throttle body
3.4 water pump
3.4 exhaust manifolds
3 O2 sensors
stock 3.4 elbow
3.4 intake runner with injectors and fuel rail
new 3.4 alternator (may be same as LT1, not positive though)
LT1/3.4 a/c compressor
3.4 power steering pump and bracket
4l60E transmission from 94 V6 in great shape
jointed driveshaft with torque arm
3.4 motor mounts
3.4 oil filter mount
EVERYTHING IS OBO
Email or PM me for pics
Registered User
Joined: Jan 2003
Posts: 1,198
From: NYC
Thread Starter
Registered User
Joined: Jan 2005
Posts: 174
Re: A Bunch Of Parts
scyzoryk:
i have it but i dont think im going to sell it.
Russ95Z28:
im not sure if it will fit the lt1 or not. Im also not sure what its worth, pm me with an offer and well go from there.
GetaZforgetGT:
It isnt a 9", its a 9 bolt borg warner rear end out of the IROC's.
i have it but i dont think im going to sell it.
Russ95Z28:
im not sure if it will fit the lt1 or not. Im also not sure what its worth, pm me with an offer and well go from there.
GetaZforgetGT:
It isnt a 9", its a 9 bolt borg warner rear end out of the IROC's.
Thread Starter
Registered User
Joined: Jan 2005
Posts: 174
Re: A Bunch Of Parts
87CIZ:
Not sure i will seperate them yet, but it seems inevitable that i will have to. If i do seperate, i would like no lower than $300 due to the cost of the sandblasting and materials. Im located in anderson, in 46013.
Not sure i will seperate them yet, but it seems inevitable that i will have to. If i do seperate, i would like no lower than $300 due to the cost of the sandblasting and materials. Im located in anderson, in 46013.
