Birdie2000

All prices OBO. Will ship at buyer's expense. All items sold as is.

Will get pics as time allows. Click on pics for larger version.
Additional pics in posts 9-10

Heads - SOLD
AFR 210 LT1/LT4
Ported for a blower application
222cc Intake Ports
78cc Exhaust Ports
64cc Combustion Chambers
Intake flow 283cfm @ .700" 4.030 bore
Exhaust flow 256cfm @ .600" w/ 1-5/8" pipe
Fresh valve job & resurface
Patriot Xtreme springs installed - new
-Installed height/seat pressure - 1.800/165
-Max open height/pressure - .650/550
-Coil bind height - .675
Brand new - only used for mockup
Flow sheet in post #9

Supercharger - SOLD
Vortech YSi
Satin
Straight Discharge
Brand new - only used for mockup




Supercharger Brackets - SOLD
Made by Chris Sikora aka Z8's
For LT1 F-bodies
Only used for mockup
Solid tensioner
Aluminum idler
Includes required brackets from Vortech's kit also
Requires ATI Balancer
MSD Crank Trigger setup for these brackets for additional fee (requires custom crank pulley also for sale)




Pulleys - $75/each or $350 for all

ASP Cog
For Vortech YSi or compatible
3 Gates Polychain GT kevlar belts also available

Blower:
3.125" 32 teeth
2.93" 30 teeth
2.75" 28 teeth
2.5" 26 teeth
Crank:
7.8" 79 teeth
6.75" 68 teeth

Bypass Valves -

Vortech "Super" Mondo Bypass - Now called the MaxFlow BV57
Satin
Used, in good condition
SOLD

Vortech Mondo Bypass
Polished
Used, in good condition
SOLD

Intercoolers -

Griffin A2A - SOLD
Mounts behind front bumper of 4th gen Camaro
Can include 3.5" aluminum piping with Vortech MaxFlow BV57 installed for an additional $375
Used, in good condition

Griffin A2A - SOLD
Mounts behind front bumper of 4th gen Firebird/Trans-Am
Endtanks positioned so inlet/outlet both located at bottom of the core
Only used for mockup

Headers - SOLD
Hedman Husler Part # 65385
1-7/8 Primaries
3.5" Collectors
Fits 93-97 F-body w/ LT1 engine
Jet Hot coated - excellent condition
Stahl bolt pattern - Adapter flanges & gaskets included
Used, in excellent condition




Fuel System -

Product Engineering PE 4550 Street Fuel Injection Pump - http://www.product-engr.com/Old/PE_4550.htm
Supports 1175hp
Cleanable fuel filter
Street-friendly - rated for continuous duty
Includes dual relay wiring harness
Alcohol Compatible
12 or 16 volts
Never used
SOLD

96lb Delphi Low-Impedance Fuel Injectors
Purchased from Racetronix
Flow-matched
Never used
SOLD

Speed Inc. Aluminum Factory-fit Fuel Cell for 4th Gen F-bodies
Sumped
Fits in factory location with factory straps
Includes factory sender adjusted for proper reading
Installed but never saw fuel
SOLD

Engine Management -

AEM EMS
From a Honda Civic (Serial #1010-0359)
Can control many different engines including LS1 engine or 24x converted LT1 with an adapted ECM connector
Used, in good condition
SOLD

F.A.S.T. Classic Sequential Fuel Injection
Programmed up for optispark
Includes wideband O2
Brand new universal LT1/SBC harness and injector harness
Everything else used, in good condition
SOLD

RealQuick

Is the harness plug and play for an LT1? Do you still keep the factory ECU to run your gauges?

Birdie2000

It's a universal harness from FAST, it's not 100% plug and play. To my knowledge you would need the factory computer for the gauges. I originally intended to use all aftermarket gauges so this wasn't a concern for me. I never used the system so unfortunately I can't answer too many installation questions.

filbielansk

vortech complete? got pics?

Birdie2000

The YSi is just for the head unit, it's not part of a kit. The brackets for it are for sale separately in the above post as well as all other parts needed to make a kit that would support 1000+hp.

I can get pics in the next couple days. I've been pretty busy and am still in the process of going through all the things in my garage.

Birdie2000

Added some pics.

Robsquikz28

Brand and pix of injectors.

Birdie2000

I bought them from Racetronix, don't list a brand aside from Delphi. I can get pics tomorrow when I'm at my shop next.

Birdie2000

I'll also use this post for additional pics since there's apparently a limit of 10 per post.

Click pics to enlarge.

Injector pic:


Flow sheet for AFR heads:


Fuel pump pic:

Birdie2000

---Post reserved for pics---

Birdie2000

ttt

MattSLONOMO

How many gallons does the
"Speed Inc. Aluminum Factory-fit Fuel Cell for 4th Gen F-bodies" hold?..
I need something larger for my big block than the stock size..

Thanks Ahead!
Matt

Birdie2000

Can't remember exactly, but it's less than the factory tank. Sorry.

Birdie2000

Fuel tank sold!

Ponyhntr

How is plug access with those headers? How do they fit?