AFR 210 heads for sale for classic sbc
 

Just picked up from J&L machine shop in Allison, everything gone through and new parts throughout, ready to bolt on and go racing.

AFR 210 race ready aluminum heads, flow sheet available upon purchase-but mimics AFR's advertised flow sheet within 2 cfm. 280.8 cfm @ 28" .600 and .700 lift on the intake. 223.7cfm @700 exh. Heads have never been ported or molested. brand new stainless steel 2.08/1.60 manley undercut valves, new guides/seats-valves ground to fit new seats, fresh minor surfacing to retrue deck. 69cc chambers, good upto .660 solid roller, AFR guide plates, uses standard 23* valve train parts. $1200

These heads have been torn down completely and cleaned, everything checked/replaced and given the okay, new parts ready to go and can make big numbers. on top of my old 388 it pushed my 3600lb ride to a 10.98 on 91 octane through the mufflers and combination was no where near maxed.

Comp Pro Mag 1.5 roller rockers $200-will come with long rocker arm nutz for use with stud girdle listed below

contact Josh at j.meighan@mchsi.com

stepping upto larger heads and different valve train so this stuff has got to go.
BTE stud girdle $30

Are they still available? And if so, would you be willing to let them go for any cheaper?

Story of the heads being sold:

I listed them on a number of sites I got to
1 hour later I get a message from pay pal saying I had money in my account...but did'nt say for what
3 hours after that I get an email from a guy saying he bought my heads LOL!!

That's the nice thing about buying great heads or quality anything...it retains it's value-esspecially since these heads were all new again and cheaper than new price:)

lol! Nice job on the deal.