Out of 1996 WS6 T/A.
Motor has 92k miles on it. Oil PSI is a bit low, down near the warning level if idle drops down below 700rpm. Normally car idles higher, but thought I'd mention this.
You will get motor complete from waterpump, opti, intake, injectors, fuel rails, heads, shortblock, oilpan etc...
Motor doesn't smoke, but hp seems a bit low, but my car is WAY out of tune computer wise too.

want $650 for complete motor
or if parted prices are:
$250 for heads
$75 intake
$50 cam
$300 shortblock
$65 opti
$25 waterpump(looks to have been replaced)
$50 injectors
$50 fuel rails w/fpr

buyers pay all shipping costs if shipped
jcook84889@insightbb.com

motor will be pulled next week so if your local and want to hear it run lmk

 

i'll take the water pump if you still have it. do you happen to have a starter thanks

 

I want the short block but what will shiping cost to NY

 

oh man
shipping is probably going to be $150-250 depending on frieght company
it will have to be shipped on pallet frieght charged and you will probably need to pick it up at terminal

if you want it fine, but shipping will be alot

 

93_zracer

I'm gonna see if anyone wants it all first
if not then yes you have dibs on the waterpump

I'm gonna get pics when stuff is pulled too

and no I need the starter for my new motor

 

Hi, Im from IN, whats the bottom dollar on the complete set up if I came and picked it up. Also, does it come with the wiring harness and computer

 

How far from Oswego are you? AAA Cooper Transportation would probably ship shortblock strapped to a pallet from the Oswego terminal to New York for about $80.

-Josh

 

no computer or wiring harness
bottom dollar for whole setup is $600 for pickup


I don't know where oswego is so I'm gonna assume it's not close

give me zip and I'll plug it into mapquest

 

Oswego is in Il.. 82 miles, 1 hour 26 minutes from Chicago.. They do pickup from businesses.. So if you take it to a business.. Residential is like a $75 fee and not worth it. However, business to business is cheaper than **** If you are interested I can probably get it done for $90-$100 business to business.. peace

 

well the motor will be at Pn G auto repair so if you wanna call and get a quote or whatever then sure
I'll release the motor to you after payment.
let me know
ps oswego is 76 miles from rockford IL where the motor is at

 

I was just giving you some info if you wanted to ship, it'd only be $90 using them from business to business to NJ as you said shipping would be an assload.. Seeing as how a machine shop is a business You can get it shipped to a business for like $90ish.. Just some info..

Peace,

 

oh ok
thanks