383 Long block or short block for sale
#1
383 Long block or short block for sale
1000 Miles
Motor is 383 11:5:1 compression
Powder Coated Black LT1 Intake
Stock ported heads with 918 springs and titanium retainers
New Oem Comp Lifters
Custom Length Comp Hardened push rods
Comp Pro Magnum Roller Rockers and GMPP Guide Plates
Comp 236/245 114 LSA .569/.580
SFI Balancer Zero balanced
No egr or air
Forged Diamond Pistons -6cc reliefs
Forged 4340 Eagle Rods
Forged 4340 eagle Crank
Clevite Race series bearings
Melling High Volume oil pump
Callies 4 Bolt Splayed Main caps
Canton Revised Pan
3200 for long block
2800 for shortblock
This same motor costs 4200 new from most of the sponsors just for the short block and mine has less than 1000 miles on it and has been broken in properly
With the heads on it made 392/392 with an opti that was going bad and it was done through a dennys driveshaft and a 9 inch. The motor will also take a 300 shot
I can also meet halfway for people that live within about 10 hours of here so that I only have to drive 5. Im in chicago area
Also included is pcm and harness
Motor is 383 11:5:1 compression
Powder Coated Black LT1 Intake
Stock ported heads with 918 springs and titanium retainers
New Oem Comp Lifters
Custom Length Comp Hardened push rods
Comp Pro Magnum Roller Rockers and GMPP Guide Plates
Comp 236/245 114 LSA .569/.580
SFI Balancer Zero balanced
No egr or air
Forged Diamond Pistons -6cc reliefs
Forged 4340 Eagle Rods
Forged 4340 eagle Crank
Clevite Race series bearings
Melling High Volume oil pump
Callies 4 Bolt Splayed Main caps
Canton Revised Pan
3200 for long block
2800 for shortblock
This same motor costs 4200 new from most of the sponsors just for the short block and mine has less than 1000 miles on it and has been broken in properly
With the heads on it made 392/392 with an opti that was going bad and it was done through a dennys driveshaft and a 9 inch. The motor will also take a 300 shot
I can also meet halfway for people that live within about 10 hours of here so that I only have to drive 5. Im in chicago area
Also included is pcm and harness
Last edited by unTAmedLS1; 01-08-2007 at 04:56 AM.
#4
I am parting the whole car out. There is literally nothing wrong with it and the miles stated are the truth. I am parting it because I want to pay off some bills and also get my own place. I have a daily driver which wouldn't be smart to sell right now so I have to sell this stuff. I have had the car for 5 years and am actually attached to it but just have to do other things right now. As far as shipping overseas I could do that I'm just not sure how to.
#6
I will have pics up soon some are also on my cardomain site of the bottom end
http://cardomain.com/id/97m6formula
http://cardomain.com/id/97m6formula
#8
hit me up with a PM. Include price and how many times it was squeezed on. Alsio if you know right off what kind of numbers it put down. I am VERY VERY VERY interested in it as a long block. I am also close enough to pick it up.
Last edited by 9formula4; 12-28-2006 at 11:18 AM.
#12
new reduced price it's going on ebay if it doesn't sell here
and this is the car idling in the summer
Click here to see Video
and this is the car idling in the summer
Click here to see Video
Last edited by unTAmedLS1; 12-31-2006 at 06:43 AM.
#13
here's the dyno sheet and heres a link since it's hard to read on here http://tinypic.com/view/?pic=4cuu1e9
#14
new price but no opti is included and no throttle body. I can get New gm optis for cheap if you need one and i also have an old stock throttle body if you need it included its free