1000hp + supercharger setup for sale!
#1
1000hp + supercharger setup for sale!
This is gonna make someone who loves street racing one happy puppy.
This is not complete, as you still need to buy the supercharger ....
All forged 468 big block 8.5:1 compression. All it needs is about 4k of a procharger (D2 or F1R) to make an EASY 1,000hp on PUMP GAS. Have a TH400 w/hd converter built to handle 1200hp.
Specs on motor: 454 4 bolt block, TRW Forged Dome pistons (.60), Eagle Forged 4130 Steel crank at 4.00 stroke, Eagle ESP forged rods, Crane Cams .571”/.585” , 306/314 advertised duration, 1974 Iron heads casting #049, large oval port open chamber, 122cc chambers, 255cc/119cc ports, 2.19/1.88 Manley Stainless Steel valves, Crane Cam High Energy lifters, Crane Cam Race Valve Springs valve lift up to .690”, Crane Cam Chrome Moly heat treated 7/16 pushrods, Harland Sharp Roller Rockers 1.7 ratio
$4,000 FIRM.
This is not complete, as you still need to buy the supercharger ....
All forged 468 big block 8.5:1 compression. All it needs is about 4k of a procharger (D2 or F1R) to make an EASY 1,000hp on PUMP GAS. Have a TH400 w/hd converter built to handle 1200hp.
Specs on motor: 454 4 bolt block, TRW Forged Dome pistons (.60), Eagle Forged 4130 Steel crank at 4.00 stroke, Eagle ESP forged rods, Crane Cams .571”/.585” , 306/314 advertised duration, 1974 Iron heads casting #049, large oval port open chamber, 122cc chambers, 255cc/119cc ports, 2.19/1.88 Manley Stainless Steel valves, Crane Cam High Energy lifters, Crane Cam Race Valve Springs valve lift up to .690”, Crane Cam Chrome Moly heat treated 7/16 pushrods, Harland Sharp Roller Rockers 1.7 ratio
$4,000 FIRM.
Last edited by 89IROCZZ4; 09-18-2003 at 10:15 AM.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
10-31-2016 11:09 AM
CARiD
Supporting Vendor Group Purchases and Sales
0
01-27-2015 06:27 AM