10 Second LT1 part out!!! (PICS)

Thread Tools
 
Search this Thread
 
Old Sep 10, 2008 | 04:08 PM
  #1  
lt1junkie's Avatar
Thread Starter
Registered User
 
Joined: Feb 2008
Posts: 91
10 Second LT1 part out!!! (PICS)

Well i am listing up pretty much my whole old setup... which only has a bout 5 hours on it... Decided to go a different route on a motor. So here goes the following I will list resonable prices.. if anyone wants to shot me a better offer feel free but please NO LOW BALLERS!! ALL parts were bought brandnew!!! Shipping not included unless otherwise discussed

This was a 12:5:1 385CI Le3 motor

le3 Heads 2.05/1.60 w/ beehive springs
asking $1400

Le3 cam 236/240 @ 608/600 on a 105 intake center and a 107 lsa
asking $175

Le Ported lt1 intake for 58mm Tb
SOLD

SRP 4.040 -5 cc forged flattop pistons 3.75 stroke on a 5.7 rod
SOLD

Eagle H-Beam Rods 5.7
Asking $280
Sumimt part number esp-5700b3d


BBK 58 MM Tb
Asking $200 plus shipping

Vortech aluminum elbow W/ two TNT wet N20 nozzles w/ jets up to 250hp t's included with all lines and two bags of jets
asking $210

Ford Racing 42lbs Green top injectors
SOLD

Comp cams PRo Magnum series 1.6 roller rockers NSA
part # CCA-1305-16
SOLD

Comp cams pro magnum Roller lifters
part #cca-875-16
SOLD

Comp Pro magnum hardend pushrods 5/16 Dia 7.200 lengh
part # CCA7608-16
asking $65

Aluminum center bolt V/C's for lt1 w/o factory alternator location
Asking $120

A few pics of the parts new and some of when i took the motor apart
Name:  Baby023.jpg
Views: 13
Size:  93.9 KB
Name:  Baby031.jpg
Views: 17
Size:  59.3 KB
Name:  Baby032.jpg
Views: 27
Size:  59.3 KB
Name:  DSC00211.jpg
Views: 14
Size:  160.4 KB
Name:  DSC00148.jpg
Views: 11
Size:  172.4 KB
Name:  DSC00149.jpg
Views: 19
Size:  98.7 KB

Last edited by lt1junkie; Sep 13, 2008 at 08:11 AM.
Old Sep 10, 2008 | 05:37 PM
  #2  
Yoeasy69's Avatar
Registered User
 
Joined: May 2007
Posts: 52
what size chambers on the heads?
Old Sep 10, 2008 | 06:04 PM
  #3  
6SpdLT1Z's Avatar
Registered User
 
Joined: Sep 2004
Posts: 2,595
From: Lenexa, KS
Are rockers SA? I'm interested if so.
Old Sep 10, 2008 | 06:31 PM
  #4  
lt1junkie's Avatar
Thread Starter
Registered User
 
Joined: Feb 2008
Posts: 91
Originally Posted by Yoeasy69
what size chambers on the heads?
They are 58cc.. when we checked them after getting them back from llyod
Old Sep 10, 2008 | 06:32 PM
  #5  
lt1junkie's Avatar
Thread Starter
Registered User
 
Joined: Feb 2008
Posts: 91
Originally Posted by 6SpdLT1Z
Are rockers SA? I'm interested if so.
negative ran guide plates... and i have those as well

Last edited by lt1junkie; Sep 11, 2008 at 05:33 PM.
Old Sep 10, 2008 | 06:47 PM
  #6  
remaxracer45's Avatar
Registered User
 
Joined: Oct 2002
Posts: 1,875
From: Wisconsin
what about the rest of the nitrous setup? did you spray 200?
Old Sep 10, 2008 | 06:50 PM
  #7  
lt1junkie's Avatar
Thread Starter
Registered User
 
Joined: Feb 2008
Posts: 91
Originally Posted by remaxracer45
what about the rest of the nitrous setup? did you spray 200?
this is just for the TNT dual nozzle setup minus the plate and i replaced with the elbow.. and no the car never saw a 200.. i was running outta gear a lil after the 1/8th on 150 with 28' 4.10's and th-400... does come with the lines though
Old Sep 10, 2008 | 06:51 PM
  #8  
brahm's Avatar
Registered User
 
Joined: Jul 2008
Posts: 156
From: Mammoth Lakes, CA
can you give me a shipping cost on the head/intake/cam to 93546 & 92122
Thank you
-Brahm
Old Sep 10, 2008 | 10:28 PM
  #9  
lt1junkie's Avatar
Thread Starter
Registered User
 
Joined: Feb 2008
Posts: 91
Originally Posted by brahm
can you give me a shipping cost on the head/intake/cam to 93546 & 92122
Thank you
-Brahm
pm sent
Old Sep 11, 2008 | 07:43 AM
  #10  
kgkern01's Avatar
Registered User
 
Joined: Nov 2002
Posts: 1,332
From: Louisville KY
I'll take the pistons.

Last edited by kgkern01; Sep 11, 2008 at 08:00 AM.
Old Sep 11, 2008 | 01:05 PM
  #11  
whammer33024's Avatar
Registered User
 
Joined: Jan 2008
Posts: 154
ummm...i don't believe 1305-16 rockers are SA
Old Sep 11, 2008 | 05:25 PM
  #12  
lt1junkie's Avatar
Thread Starter
Registered User
 
Joined: Feb 2008
Posts: 91
Originally Posted by whammer33024
ummm...i don't believe 1305-16 rockers are SA
they aren't sorry messed up on the post!
Old Sep 11, 2008 | 05:26 PM
  #13  
lt1junkie's Avatar
Thread Starter
Registered User
 
Joined: Feb 2008
Posts: 91
Originally Posted by kgkern01
I'll take the pistons.
pmed ya
Old Sep 12, 2008 | 04:46 PM
  #14  
lt1junkie's Avatar
Thread Starter
Registered User
 
Joined: Feb 2008
Posts: 91
bump for the evening!!!
Old Sep 13, 2008 | 04:56 PM
  #15  
lt1junkie's Avatar
Thread Starter
Registered User
 
Joined: Feb 2008
Posts: 91
bump for the day



All times are GMT -5. The time now is 04:29 PM.