$6500 takes it all !!! Great deal on Hi-po parts
Thread Starter
Registered User
Joined: Sep 1998
Posts: 137
From: Horsham, PA
$6500 takes it all !!! Great deal on Hi-po parts
I am selling everything below as a total combo for $6500 firm. EVERYTHING listed below is included. I will NOT be parting any of this out, and it has to be picked up, nothing will be shipped. I want to move this stuff ASAP as I will be going away for 6 months as early as January and need to clear out some stuff.
Below is what I have to sell.
The motor is a 11.7:1, 6.0" H-beam, SCAT 9000 series, SRP forged piston 383 solid roller. The top end was bought from INTMD8 2 years ago and I have put less than 800 miles on this combo. This combo dyno'd 453rwhp / 416rwtq with an M6. I also have a copy of the dyno tune for this combo.
Top End:
* Stage IV GTP heads, ported LT1 intake, custom grind cam motion 250 duration / .600 lift solid roller cam.
* GTP states they flowed 297cfm @.600 on the intake with a 2.055 valve and a 197cc intake runner. I do not have a copy of the flow sheet.
* Chromoly pushrods and Crane solid roller lifters.
* The heads were just done over by a local machine shop and are totally redone and ready to go (have receipt).
Shortblock:
* LT1 2 bolt main, fully machined stroker block.
* 6.0" Scat Pro series H-beam rods with ARP rod bolts.
* SRP forged flat top pistons (11.7:1 with above heads)
* SCAT 9000 series stroker crank.
* @800 miles on this shortblock.
TH400 Tranny:
* Brand new, still on the crate COAN Engineering TH400 Competition Trans part number 21110-0 and COAN Engineering 10inch Competition Convertor Part Number:
I also have miscellaneous stuff, everything listed was on the car for @800 miles.
* Fluidampr crankshaft balancer.
* BBK 58mm TB
* CSI electric water pump
* 95+ Vented Opti conversion
* 1.6 Roller rockers
* LT4 valve covers
* SVO 36# injectors.
* Hooker Shorty headers (coated) with MAC off-road pipe and coated Y-pipe
Rolling Chassis:
*1994 Z/28 with 70k miles on the body. Car is in excellent shape, never been in an accident.
*Black with cloth Charcoal interior, T-tops., p/w, p/s, p/b, a/c, power driver seat, leather wrapped steering wheel, 150mph speedo cluster, tinted windows, stock wheels (comp T/A's up front, Nitto DR's in the rear, 245/50/16)
* Random Tech adjustable T/A, BMR LCA lowering brackets, Lakewood LCA's, SLP Boxed panhard bar, RR air bag, Motive 3.73:1 rear, and tranny cooler.
* Currently the K-member, engine and tranny are out of the car. I have everything to finish this project with the exception of a few gaskets and the necessary parts to install the TH400.
Everything is at my place in Plymouth Meeting, PA 19462 and ready to go. Any questions feel free to email me (WildThing94Z@hotmail.com). The reason that I am selling everything is that I do not have the time to finish the car and sell complete. I recently received a conditional offer with the Pennsylvania State Police and could start as early as January. That being said I need to liquidate some toys, and this has got to go.
I'm also selling my 1998 Harley Davidson Softail Custom for $15,000. Lot's of chrome extra's. I have pic's if anyone is seriously interested.
Thanks,
Pete
Below is what I have to sell.
The motor is a 11.7:1, 6.0" H-beam, SCAT 9000 series, SRP forged piston 383 solid roller. The top end was bought from INTMD8 2 years ago and I have put less than 800 miles on this combo. This combo dyno'd 453rwhp / 416rwtq with an M6. I also have a copy of the dyno tune for this combo.
Top End:
* Stage IV GTP heads, ported LT1 intake, custom grind cam motion 250 duration / .600 lift solid roller cam.
* GTP states they flowed 297cfm @.600 on the intake with a 2.055 valve and a 197cc intake runner. I do not have a copy of the flow sheet.
* Chromoly pushrods and Crane solid roller lifters.
* The heads were just done over by a local machine shop and are totally redone and ready to go (have receipt).
Shortblock:
* LT1 2 bolt main, fully machined stroker block.
* 6.0" Scat Pro series H-beam rods with ARP rod bolts.
* SRP forged flat top pistons (11.7:1 with above heads)
* SCAT 9000 series stroker crank.
* @800 miles on this shortblock.
TH400 Tranny:
* Brand new, still on the crate COAN Engineering TH400 Competition Trans part number 21110-0 and COAN Engineering 10inch Competition Convertor Part Number:
I also have miscellaneous stuff, everything listed was on the car for @800 miles.
* Fluidampr crankshaft balancer.
* BBK 58mm TB
* CSI electric water pump
* 95+ Vented Opti conversion
* 1.6 Roller rockers
* LT4 valve covers
* SVO 36# injectors.
* Hooker Shorty headers (coated) with MAC off-road pipe and coated Y-pipe
Rolling Chassis:
*1994 Z/28 with 70k miles on the body. Car is in excellent shape, never been in an accident.
*Black with cloth Charcoal interior, T-tops., p/w, p/s, p/b, a/c, power driver seat, leather wrapped steering wheel, 150mph speedo cluster, tinted windows, stock wheels (comp T/A's up front, Nitto DR's in the rear, 245/50/16)
* Random Tech adjustable T/A, BMR LCA lowering brackets, Lakewood LCA's, SLP Boxed panhard bar, RR air bag, Motive 3.73:1 rear, and tranny cooler.
* Currently the K-member, engine and tranny are out of the car. I have everything to finish this project with the exception of a few gaskets and the necessary parts to install the TH400.
Everything is at my place in Plymouth Meeting, PA 19462 and ready to go. Any questions feel free to email me (WildThing94Z@hotmail.com). The reason that I am selling everything is that I do not have the time to finish the car and sell complete. I recently received a conditional offer with the Pennsylvania State Police and could start as early as January. That being said I need to liquidate some toys, and this has got to go.
I'm also selling my 1998 Harley Davidson Softail Custom for $15,000. Lot's of chrome extra's. I have pic's if anyone is seriously interested.
Thanks,
Pete
Registered User
Joined: Aug 2001
Posts: 874
From: Carlisle, PA
Re: $6500 takes it all !!! Great deal on Hi-po parts
They way you have it broken down it looks like the parts are not completely put together but I may just be misreading it.
If you were parting it out I might be interested in the complete short block.
If you were parting it out I might be interested in the complete short block.
Last edited by GetaZforgetGT; Jul 27, 2004 at 08:49 AM.
Thread Starter
Registered User
Joined: Sep 1998
Posts: 137
From: Horsham, PA
Re: $6500 takes it all !!! Great deal on Hi-po parts
I hear ya on the "hints" 
I had posted this stuff (minus the car) back in April, but to be honest I'm not sure how much time I have to send out everything individually and keep track of the individual sales etc. If it comes down to parting this stuff out, then so be it . . . but I would "prefer" to have someone take it, then do what they want with the parts/car.
The heads/intake are off the car, the shortblock is fully assembled and sitting on the K-member with a blown 4l60e hooked to it. I have just about everything needed to make this running again with the exception of the conversion pieces for the TH400. The suspension pieces listed are hooked up to the rolling chassis.
I don't have pics of the car stuff yet, but I do have pics of the bike.
Pete.
I had posted this stuff (minus the car) back in April, but to be honest I'm not sure how much time I have to send out everything individually and keep track of the individual sales etc. If it comes down to parting this stuff out, then so be it . . . but I would "prefer"
to have someone take it, then do what they want with the parts/car.The heads/intake are off the car, the shortblock is fully assembled and sitting on the K-member with a blown 4l60e hooked to it. I have just about everything needed to make this running again with the exception of the conversion pieces for the TH400. The suspension pieces listed are hooked up to the rolling chassis.
I don't have pics of the car stuff yet, but I do have pics of the bike.
Pete.
Thread
Thread Starter
Forum
Replies
Last Post
F'n1996Z28SS
Cars For Sale
8
Aug 23, 2023 11:19 PM