Time to move on to another project, err....actually something that is not a project is preferred.

Figured I'd post here and cz28.com before going to "E" bay.

I'm parting out the old girl and moving on and not looking back.

I'd like to get 60% of whatever things costed new, will figure that out shortly.

Most of the stuff has less than 6,000 miles on it.
The rolling chassis has 79,900

I've got an infant daughter and am working on another one, I just don't have the time or interest anymore for a mainly drag race only car and I'm not going backwards with this car. My next toy will be a more multi purpose street / strip vehicle....... won't be as fast but won't be one dimensional either.

Parts for sale are:
Rolling chassis $1200
58 mm AS&M Throttle body $325
3 bar map SOLD
FLP long tube headers, cats, off road pipes and 4" mufflex $800
starter $95
Mezz water pumpw/ black powder coated housing SOLD
E-dist $200
HPP III - 98 LS1 $150
Spohn lower control arms non adjustable red SOLD
Spohn panhard rod non adjustable red SOLD
airbag $25
Denny's Nitrous ready driveshaft SOLD
Optima red top battery SOLD
5 pt harness w/ quick release - exp 4 2007 - can re-certify for $60 when the time comes $90 - comes with extra 5 pt hook and latch harness if interested - both are red
2 pod gauge pod - SOLD
Auto meter boost gauge - goes to 20#'s SOLD
Auto meter electric fuel pressure gauge SOLD


.30 over LT-1 block w/ splayed main caps
Callies forged crank
Oliver forged I beam rods
JE Forged pistons .30 over -16cc dish
Oil pan
Would prefer to sell the whole shortblock as an assembly
s/b to include block, splayed 4 bolt main caps, billet front cap, Callies forged crank, Oliver forged I beam rods, JE forged pistons -16cc dish, ATI Superdamper sfi spec, h/v oil pump, canton oil pan - SOLD
72 # injectors SOLD
dual intank pumps w/ lines and hobbs switch, regulator and fuel rail - need fuel bucket and pump exchange - - SOLD
intake manifoldpowder coated black, ported for 58 mm t/b and gasket port matched on the head SOLD
CNC headsCNC stage III blower porting, rocker studs w/ guide plates, 2.02 / 1.60 62 cc chamber SOLD
2 bar map $ - SOLD

pushrodsComp cams chromoly hardened pushrods - SOLD
Crane roller rockersGold 1.6 ratio - SOLD
lifters Comp Cams R series lifters - SOLD
Camshaft - CC305 SOLD

D-1 Pro Charger w/ race by-pass valve and 3 core F/M intercooler SOLD
FAST box w/ wide band O2 sensor SOLD
Mister Green alternator SOLD
4" steel donut SOLD
Tranny blanket - SOLD
Strange 12 bolt 3.42 gears SOLD
Torque arm SOLD
27 x 11.5 x 15 Hoosiers QTP's w/ Weld Draglite 15 x 10 w/ 7.5 BS SOLD
PA Racing K-member red SOLD
SS hood SOLD
Skinnies SOLD
3.7" blower pulley SOLD
3.85" blower pulley SOLD
fire jacket - XL red - SOLD


Marc
marc94z@yahoo.com

 

So.... You are not looking to sell it in one piece?

 

It's worth more in pieces besides I'm keeping the torque converter, tranny and T-com for my next project.

Marc

 

Marc, how much for the 2 bar map and fuel system....I dont need injectors. Did you reuses the stock fuel rails and fuel lines? If so, I dont need the rails or regulator.

 

Would you be willing to ship the ss hood? If so what are you looking to get for it?

Thanks
Ben

 

Ben,
Shipping the hood wouldn't be high on my list at this time but if it sits for a while I might consider it.

Marc

 

Just curious what color is the hood?

 

Actually I looked at the pictures and saw that it was red. Is the hood scoop open and functional? I actually need a red hood so it would be great if you would be willing to ship.

 

Done deal on the fuel system and 2 bar MAP. Nice talking with you Marc, M/O will be on the way this week.

Jon

 

Hello,
Yes, the hood scoop is open and functional.

Let me see what I can do on the finding a box to ship it (didn't keep the one it came in) and how much it would be. I belive it cost $~80 to ship it

Please advise zip code.

Jon,
Nice doing busines with ya

Marc

 

Hi Marc

My zip code is 14830 That is corning N.Y.. If it would save any money I could have it shipped to a bussiness addresse in either zip 14830 or 14902

thanks
Ben

 

Marc, sent you a PM on LS1tech on the motor/blower.

Ben, if I buy this setup and you want the hood we could drive out together and get the stuff.

Thanks, jason

 

Ben,
Hopefully the deal with Jason will work out and you guys can come and get all the stuff. The hood is yours, I had listed $400 in my notes as far as what I wanted but I checked and $350 is on both boards so $350 it is.

Marc

 

Thanks Marc

Yes I deffinatley want the hood. I am not in any big hurry so lets see were we end up with Jason and go from there.

thanks
Ben

 

Dropped the price on the rolling chassis to $1200

Marc
marc94z@yahoo.com