Hey guys. I am from Everett, MA. and my car is in my sig. I'm trying to break mid 10's in my car some day. I am working on getting my FLP headers in really soon. Anyone have any suggestions as to what I should mod next to work my way into the 10's? I know, 12's and 11's come first, but mid 10's is my end goal. Anyone interested in getting together to teach me how to race? I am getting HORRIBLE traction. I SHOULD break 12's I think if I can get some traction. Thanks in advance.

------------------
--Michael
'01 Camaro SS A4
Mods Include:
Superior 3.73 Gears, Jet Chip Racing Chip, K&N Air Filter, Free Ram Air Cut-out, Granatelli MAF, Whisper Induction Lid, Corsa Cat-back Exhaust, Auburn Carrier, Hypertech 160 Degree Thermostat, SLP Strut Tower Brace, Sub Frame Connectors, Throttle Body Bypass, Powerslot Slotted Rotors, Durastop Performance Brake Pads, B&M Deep Transmission pan, Dynamic Motorsports lower control arms.

Best 1/4: 13.192 @ 106.38MPH w/2.086 60' on GoodYear Eagle F1 tires.

Recent 1/4 run on 4/10/02: 13.502 with a 2.367 60' on 275x40ZR17 Dunlop SP sports, without the 160 thermostat, STB, SFC, or TB Bypass--With Some DR's, maybe run a 12.8, or 12.7? Fingers crossed. Headers coming soon.

See "Cammie" at http://members.cardomain.com/ozorowsky

 

read my mods, that still wont get tens but really really close. MAybe with slicks and a really good driver,but I am not that man.

------------------
ARE stage 1 heads w/ REV valves and REV true double springs
thunder cam 112 titanium retainers, 7.350 hardend push rods, jesel 1.7 rockers
asp pullies
1 3/4 full length headers w/ orp
borla xr1 muffler into center mount exhaust (4 pipe option)
ported and polished tb
slp 85mm maf
K&N FIPK
ls6 intake manifold
cartek clutch and adj master w/ hayes flywheel
Moser 12 bolt 33 spline eaton posi with 4.10
BMR LCA
Spohn adj. race Torque Arm
Spohn moser 12 bolt relocation brackets
BMR Panhard rod
BMR front and rear sway bars (heavy duty)
Hal 12 way shocks
Eibach Pro springs
BMR Strut tower brace
chrome 1999 vette rims w/ 285-35-18 out the back and 275-40-17 up front Nittos
slp fan control module
ultra z funtional ram air hood
FTRA KIT
PRO 5.0 Shifter
MSD Wires
NGK Tr55's
SLP Double Roller Timing Chain.
JE Forged Pistons 3.905 bore

And a bunch of other **** I cant remember.

 

You said it better than I could have dude!

-Marc-

------------------
1992 25th anniversary edition Z28. 5.7 TPI. Slightly modded.

Check out some pics of my baby:
Pics of the car
Me, looking like a fool
I'm on the left

 

tranny rebuild,3800 stall,ET streets,12 bolt rear,TNT Nitrous kit-200 shot.

That will take you to the 10's. Don't forget the cage.

 

Well it was blown up, nice try. I will still race you with half my plug wires off, still a little more horse than you but you got torque remember. Have you sold that piece of tripe yet or what? ANd quit huting my feelings you b@stard

 

Actually I think I'm going to keep it! I'm think of putting a set of heads on it over the winter but who knows.

-Marc-

------------------
1992 25th anniversary edition Z28. 5.7 TPI. Slightly modded.

Check out some pics of my baby:
Pics of the car
I'm on the left