Hey guys,

See my other post for the background on this topic, but heres the problem.. I have my window switch wired the red wire to the pos. side of the battery, black wire to ground on the radiator support, white wire teed into the neg. wire on the coil to read tach signal(i think its the neg. wire anyway), and the yellow wire teed into the wire that runs from the arming switch to the WOT switch. Is that a good way or wiring? im thinking my problem is in the tach signal reading or the yellow wire. Basically the window switch doesnt only open in the window, its open full time. does my wiring sound incorrect? where do you guys read tach signal from? how about your yellow wire, where do you have it? does it being teed in affect it? Any help would be appreciated, thanks a lot.

------------------
Chris J
97 SS #2113 M6
Free mods, lowered, bolt ons, sprayed

 

you have mail. Follow this diagram and you should'nt have any probs.


------------------
96Z M6, 12 bolt Moser(3.73),NX wet kit(all the goodies),MSD 6AL,tayor spiro-pro,NGK tr-6,Star stage 2 kevlar,pcmforless programing, SLP CAI,!maf,LT4 NM,Flowmaster,Hurst roll control,BFG DR's,Pro 5.0,BMR DS loop...
13.52-103.8 mph
60ft. 1.99
no n2o times yet

 

plz email me also


thank you

 

hey kirschman can I get that too?
Thanks
Skip

 

everybody's got mail. S_willis, didnt I get this diagram from you. Maybe not. Its a preety good diagram also, I had no probs at all.

 

Hey you think I could get the wiring diagram from you? I am in the process
of trying to hook up Digital 6 and switch to my NX kit and I'm pretty relay
illiterate

Thanks

Bobby


------------------
93 Purple grey TA, WS6 chrome rims, Firehawk hood, hypercoil spring, kyb AGX's. Hotcam fully ported heads, mac headers etc..., 3200 viglante, rebuilt tranny all the good stuff! 12.69 @105.88, 1.74 60ft with Nitto's

 

you've got mail too!

 

Thanks!!!!

 

All I have to say is a big THANK YOU for the diagram, it was a big help. I love nitrous!! First time I sprayed was from a 30 roll...No traction!!!!! Time for some 17x11s with the 315 Nitto DRs! Love it love it love it! On with the 03 Cobra hunt...

here snakey snakey snakey....

------------------
Chris J
97 SS #2113 M6
Free mods, lowered, bolt ons, sprayed

 

kirschman,
could you please email the diagram please. thanks alan

Alan566@mycingular.com

 

ya got some mail Alan, hope it helps.

 

I would also like to have that diagram. Thanks In advance.

Brett

 

I would like it as well:
loadre@hotmail.com

Thanks a ton

 

Kirschman, Yes you did get that from me. Your Welcome
Skip

------------------
Michigan Skip's Flamed 95
95Z28, K&N TPIS 150hp NOS & 27mpg!
MSD 6AL, Window switch,Ford SVO 24# injectors,
2.73's (3.42's to come) Edelbrock headers, Flowmaster exhaust
BMR SFC,LCA,STB

 

Can you email it to me also. THANKS!!


------------------
KYLE-SERGEANT USMC
97 Trans Am with minor mods.
EMAIL: dayusmc@marimecorps.com