N2O Tech Discussion for the use of Nitrous Oxide

A safe N2O Setup

Old Sep 26, 2002 | 12:06 AM
  #1  
Rich_z28's Avatar
Thread Starter
Registered User
 
Joined: Jul 2002
Posts: 924
From: SE Michigan
A safe N2O Setup

I am looking into the NX and TNT systems and was wondering what all I would need to make my Nitrous system as safe as I possibly could? Also what the pros and cons of the NX and TNT systems? All info is GREATLY appreciated guys.
Old Sep 26, 2002 | 04:27 PM
  #2  
Dave 96TA's Avatar
Registered User
 
Joined: Aug 2001
Posts: 341
From: Jupiter, FL
Heres a quick list, anyone else feel free to add/modify my suggestions:
(Assuming you're going 100hp or bigger [or plan to])
1) Aftermarket multiple spark ignition system
2) Soft-touch rev limiter (cuts spark, not fuel - may be included w/ ignition system)
3) RPM window activation switch (may be included w/ ignition system)
4) Fuel pressure safety switch
5) Fuel and N2O pressure gauges
6) Timing retard control (ignition system or PCM)
7) Copper spark plugs, colder (?) heat range than stock (NGK TR6 or AutoLite 104)
8) NHRA approved blow-down tube
9) Bottle heater (optional, suggested for optimum performance)
10) Purge kit (optional, suggested for optimum performance)

what did I miss...?
Old Sep 26, 2002 | 04:51 PM
  #3  
gb95zconv's Avatar
Registered User
 
Joined: Jul 2000
Posts: 1,428
From: Woodstock,Georgia
Good job Dave....only thing I have to add it a higher flowing intank pump if you plan on more than a 100 shot.
Old Sep 27, 2002 | 11:19 AM
  #4  
Barry00Bird's Avatar
Registered User
 
Joined: Apr 2001
Posts: 23
From: Fairview TN, 37062
Wide Open Throttle switch.
Old Sep 27, 2002 | 11:54 AM
  #5  
LPEdave's Avatar
Registered User
 
Joined: Oct 2001
Posts: 1,007
From: Folsom, CA, USA
Re: A safe N2O Setup

Originally posted by Rich_z28
I am looking into the NX and TNT systems and was wondering what all I would need to make my Nitrous system as safe as I possibly could?
A window switch, set to come on at 3000 rpm, and shut off at 2900 rpm.

The safest nitrous system around.

Dave
Old Sep 27, 2002 | 10:58 PM
  #6  
Dave 96TA's Avatar
Registered User
 
Joined: Aug 2001
Posts: 341
From: Jupiter, FL
Re: Re: A safe N2O Setup

Barry - doh! Guess thats important. I assumed it would come with his kit of choice like the NX 20920.

Originally posted by LPEdave
A window switch, set to come on at 3000 rpm, and shut off at 2900 rpm.

The safest nitrous system around.
ROFL aint that the truth!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
9t4lt4z28
LT1 Based Engine Tech
1
Oct 2, 2015 10:28 AM
Z Power
LT1 Based Engine Tech
8
Sep 19, 2015 11:19 PM
DelSoto
Forced Induction
4
Sep 19, 2015 05:31 AM
rideordie
General 1967-2002 F-Body Tech
1
Sep 7, 2015 08:22 AM
PFYC
Supporting Vendor Group Purchases and Sales
0
Aug 7, 2015 08:52 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 11:25 PM.