Here's the run down. I thought I give the local guys a chance.

- Mike’s Transmission (Lancaster): (http://www.mikestransmission.com)
Custom built street/strip TH400 with roller thrust bearing, 32 element sprag, street strip shift kit, all new clutches, seals, gaskets, o-rings, bands, bushings, setup for automatic or manual shifting and it also a forward pattern. Have receipt, paid $1030.69 on 03/25/2003

- TCS Converter with ARP converter to flywheel bolts
Bought from Robert Wilson brand new. It was for his 502 motor back then and the stall was 3600 – 3800. I’m not sure what it would be for our LT1 motors Price: $300

- Madman Tranny Dip Stick
Price: $65

- GM Speedo rotor, sensor, harness - New
Price: $150

- Steel driveshaft from Drivelines Inc. in Lake Forest. It has the TH400 front yoke and the standard size u-joints to mate with the stock 10 bolt.
Price: $265

I’ll let everything go for $1200 OBO. The whole setup only has about 1500 - 2000 miles on it and I did not install the GM Speedo rotor, sensor, harness.

E-mail me at jodyj@dltechnologies.com if you have any questions. I'm located in the Socal area.

Thanks,

Jody J.