CamaroZ28.Com Message Board - View Profile: 12SCNDZ

12SCNDZ 12SCNDZ is offline

Registered User

About Me

  • About 12SCNDZ
    Location
    Newark, Delaware
    Interests
    Anything Chevrolet/Racing
    Occupation
    Transmission Rebuilder
  • Signature
    9.7 second proven "Pro Race" 4L60E...$1500. We don't offer gimmicks, We only offer the baddest 700/4L60E's on the planet!
    "It aint braggin' if you back it up" (Kid Rock)

Statistics

Total Posts
Visitor Messages
General Information
  • Last Activity: 03-18-2017 11:19 AM
  • Join Date: 03-25-2002
  • Referrals: 0

Friends

Showing Friends 1 to 1 of 1

Visitor Messages

Showing Visitor Messages 1 to 10 of 10
  1. dmaderaitt
    04-24-2013 07:16 AM - permalink
    Hey Frank,
    Just wondering if the trans dipstick should have an oring on it, small leak on that side of transmission and have had the oil cooler lines replaced and tightened down at two dealers, oil pan gasket is dry just can't really tell where it's coming from, asked the shop that replaced my trans about a month ago about the dipstick and if it had or if they replaced an oring and they don't remember, thanks.
  2. 09-05-2012 04:16 PM - permalink
    Hey frank I have a transmission question 2004 chevy silverado 1500 two wheel drive in getting a code po894 would a torque converter be a fix for that code.
  3. 05-04-2012 01:03 PM - permalink
    Hey frank I have a question and I hear you are the guy to ask for transmissions. I have a 1999 camaro with the 3.8 and 4l60e trans. I am looking for a new/rebuilt/ used one that I will swap out myself. What year range will work for me? I know the older 90's won't work but what years will? Pm me when you get a chance.

    Thanks connor
  4. 07-13-2009 04:54 AM - permalink
    I'm trouble shooting an issue with my 700r4 in a 93 z28, its rebuilt by a guy in texas, John Goble. just recently the car will not manualy downshift from drive to 2nd or 1st, I suspect some trash in a valve or something, what part controls downshifting like this and where should I start. Thanks
  5. 10-29-2008 03:24 PM - permalink
    Frank,
    I was just wondering. Do you have any special payment plans for people like myself that do not have 1300 bucks all at once. OR any type of special finacing availible. Im back and forward about rebuilding my own 4L60e because I dont have the money. I rebuilt my LT1 allready So I figured I should have some type of awareness. I know its NOT EASY. Anyway just wondering. Thanks
    Chris
  6. 10-07-2008 10:48 PM - permalink
    Hey Frank,
    I have a 94 z28 stock. Im changing the pistons and rods and putting a Pro Charger on there. Alot of people are telling me to come to you to get my transmission right for this type of setup, which will do some wear and tear on the tranny. Looking at your website now. Which setup do you think I should go with? PM back when you can..

    Thanks,
    Jack
  7. 09-30-2008 02:10 AM - permalink
    I am curious if i can put a 96 4l60e into a 94 i know i can't go the other way cause of the pwm but is it backwards compatible also do you happen to know the stock stall speed of a 94 and what stall woudl be appropriate for a mildly modded 94 with an lt4 hot cam
  8. 09-17-2008 09:16 AM - permalink
    Hi Frank, My name is Bill. I would like to speak with you to be able to bring my 2000 WS6 into your shop for some work to be performed on my transmission. Please contact me at 703-618-1115. Thank you very much
  9. 06-26-2008 09:50 AM - permalink
    Come on Frank I can see you were on here @ 5:24 this, morning Why are you avoiding me?
  10. 06-02-2008 07:44 PM - permalink
    hey give me a call, I can be there thursday evening

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.