LT1 Based Engine Tech 1993-1997 LT1/LT4 Engine Related

who has or has had headers with a stock catback?

Old Jan 3, 2005 | 05:46 PM
  #1  
Makaveli's Avatar
Thread Starter
Registered User
 
Joined: Aug 2001
Posts: 452
From: CT
who has or has had headers with a stock catback?

to anyone who has or has had headers with a stock catback, how did you like it? i havent heard of many people doing it, but i was thinking of not bothering upgrading the stock catback so quick... ill be installing SLP midlengths and getting rid of the cat, and having a shop fab up an S pipe to connect the y-pipe to a cutout then to the stock 96 catback.

any comment on the sound or sound clips? i like the stealth lower volume sound it has, and ive heard its stainless steel.
Old Jan 3, 2005 | 05:48 PM
  #2  
Kreinmc's Avatar
Registered User
 
Joined: Feb 2001
Posts: 622
From: Mesa, Az
Re: who has or has had headers with a stock catback?

Originally Posted by Makaveli
to anyone who has or has had headers with a stock catback, how did you like it? i havent heard of many people doing it, but i was thinking of not bothering upgrading the stock catback so quick... ill be installing SLP midlengths and getting rid of the cat, and having a shop fab up an S pipe to connect the y-pipe to a cutout then to the stock 96 catback.

any comment on the sound or sound clips? i like the stealth lower volume sound it has, and ive heard its stainless steel.
I do right now. Sounds great, but I am sure it is restrictive. I open the cutout at the track.
Old Jan 3, 2005 | 05:55 PM
  #3  
Makaveli's Avatar
Thread Starter
Registered User
 
Joined: Aug 2001
Posts: 452
From: CT
Re: who has or has had headers with a stock catback?

think its louder than stock while idling?
Old Jan 3, 2005 | 05:58 PM
  #4  
Kreinmc's Avatar
Registered User
 
Joined: Feb 2001
Posts: 622
From: Mesa, Az
Re: who has or has had headers with a stock catback?

Hard to say. It has a nice smooth sound at WOT. I like it, just wish the stock catback was 3".
Old Jan 3, 2005 | 06:02 PM
  #5  
zx1216's Avatar
Registered User
 
Joined: Mar 2003
Posts: 1,213
From: Milwaukee, WI
Re: who has or has had headers with a stock catback?

I think the stock piping is 2.75" so the 3 inch isn't that much bigger, most of the gains are seen by changing the mufler i would think. My hooker isn't really that much louder at idle but she screams when you get on it, i love it
Old Jan 3, 2005 | 06:07 PM
  #6  
camzaro28's Avatar
Registered User
 
Joined: Apr 2004
Posts: 1,046
From: Fargo, ND
Re: who has or has had headers with a stock catback?

i have l/t's into a o/r y-pipe into a cutout, then stock catback! when going through the stock catback its sounds a lil raspier then stock. but at idle ther isnt much difference. but when u get on it u can definetly tell it isnt stock. then after that just open the cutout and it will be crazy obnoxious
you are taking the same approach that i did. keep going with it, and dont get the aftermarket catback till u r limited on mods!
Old Jan 3, 2005 | 07:15 PM
  #7  
stereomandan's Avatar
Registered User
 
Joined: Jun 2003
Posts: 3,620
From: Saginaw, Michigan
Re: who has or has had headers with a stock catback?

You will still see decent gains, but I hope you do plan for a catback in the future. The headers are very choked by the stock muffler. Don't plan on driving around alot with a cutout. It's obnoxious loud.

There are some great flowing catbacks out there that aren't too expensive (less than $300) Hooker Catback, and Magnaflow. The SLP TOTL is also a great catback.

Dan
Old Jan 3, 2005 | 08:31 PM
  #8  
Makaveli's Avatar
Thread Starter
Registered User
 
Joined: Aug 2001
Posts: 452
From: CT
Re: who has or has had headers with a stock catback?

i know i wont be making full power with the cutout closed, im just waiting to find a good looking cheap catback thats quiet. i really dont like the magnaflow tips, hooker tips, or the SLP TOTL which was my choice in the beginning. im going to wait on it and see if i can find an SLP dual dual setup for sale, or ill end up with the hooker catback and get different tips.

thanks for the replies, anyone else have experience with the stock catback w/headers?
Old Jan 3, 2005 | 09:16 PM
  #9  
Paul94Z28's Avatar
Registered User
 
Joined: Dec 2000
Posts: 692
From: Clinton Twp MI USA
Re: who has or has had headers with a stock catback?

I had it for a while on my 94. I would consider it a waste. You should do the catback, then the headers. I *maybe* saw 5-10 outta my headers. Once I added the 2OTL catback, look out. The sound is awesome too.

Just my $.02.

Paul
Old Jan 3, 2005 | 09:22 PM
  #10  
fireman's Avatar
Registered User
 
Joined: Jul 2000
Posts: 814
From: Phoenix AZ
Re: who has or has had headers with a stock catback?

I run the stock catback with a cutout and gutted cat, using crappy Hooker shorties.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
canbaufo
Parts For Sale
7
May 25, 2015 12:01 PM
MyShibbyZ28
Parts For Sale
0
Feb 14, 2015 12:05 PM
89 iroc zl1
3rd Gen / L98 Engine Tech
0
Jan 14, 2015 02:18 AM
thenewkid
New Member Introduction
5
Nov 27, 2014 09:41 AM
GigaMp3z
LT1 Based Engine Tech
16
Feb 20, 2003 02:57 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 11:21 AM.