Just wondering what a LT1 -M6 puts down to the rear wheels stock....i have a 97 if that makes a difference.Just want to have a base line to see what i gained from the mods i have there going to be dynoing it Today/tomorrow so that's why im curious thanks guys....

 

I think its somewhere around 250-260 to the wheels stock

 

Actually its closer to the 240 range...................I'm pretty sure. Take 275 at the engine and take 15% drivetrain loss.


Chris

 

I'm going to say 245 or 250ish. Most auto's seem to dyno about 230 or 240 at least around here, in stock trim. If us use 12 percent loss with the 6 speed on a 275 horse LT1, I come up with 242. I get 250.8 going off the 285 horse LT1. I honestly don't know that there is a difference in actual power between the two different LT1 ratings, all the dyno's I've seen, seem to be consistant.

 

Sig...

Im an A4 tho. You could probably expect a wee bit more.

 

Ok so a good rule of thumb is about 240-250 ok i guess i can hope for that plus what i have for mods . i hope im near al least 370 thanks

 

my old 96 dynoed 266 RWHP and 300 TQ with a CAI and a Catback

Scoobs