same as subject

 

NGK TR55s with new stock AC Delco wires.

 

Regular Bosch Platinums, new stock wires.

 

Bosch Platinum +4 with Taylor wires.

 

ac delco platinum plugs, ac delco wires

 

Accel Shortie Plugs & Taylor Side mount over the top wires & looms. I have to use a shortie plug with my FLP's. Just too close with a regular plug.. See Linky to pics. I think there is one.

 

Acell 9000 with ngktr55 plugs, i used to use the regulaur bosche platinum but the tips burnt off them id pull one of yours and see how it looks sinisiter

 

NGK TR55's and MSD 8.5mm Super conductors..

 

AC Delco Double Platinum plugs with Taylor wires run over the valve covers.

 

Regular Bosch plats and whatever brand wires Advance Autoparts sells for our cars.

 

AAP Sells XACT (which arent that great), autolite (which are better), and they can order accel 9000 wires custom cut for LT1's.
They also carry a universal 300+ set.

I wouldnt run Bosch plats, they have a tendency to foul out (or the tip breaks off).
NGK TR55's are what most people recomend.

Accel or Taylor wires are probably the best.

 

accel 300+ wires and NGK plugs

 

Accel Extreme 9000's w/Moroso high heat covers and NGK TR6 plugs.

 

I forgot, I only use several of the Bosch plugs, and 1 Accell shorty header plug for the #5 cylinder.

 

Bosch Platinums and Taylor OVC wires. All the years I've owned cars I've always used Bosch Plats and never had a problem with any of them.