Is it time for bigger injectors?
Thread Starter
Registered User
Joined: Jun 2001
Posts: 234
From: Greater West Palm Beach, FL
Is it time for bigger injectors?
Dyno'd my car awhile back and came out with 380 rear wheel HP.....I was doing some reading and came across an injector article that said anything from 385 to 440 FLYWHEEL horsepower should have 30lb. injectors. Based on my calculations I have 430-435 flywheel horsepower.....soooo, any thoughts on what I should do?
Registered User
Joined: Aug 2002
Posts: 2,325
From: BC
Re: Is it time for bigger injectors?
Originally Posted by F(ast)-body
Dyno'd my car awhile back and came out with 380 rear wheel HP.....I was doing some reading and came across an injector article that said anything from 385 to 440 FLYWHEEL horsepower should have 30lb. injectors. Based on my calculations I have 430-435 flywheel horsepower.....soooo, any thoughts on what I should do?
Registered User
Joined: Oct 2001
Posts: 2,525
From: SoCal
Re: Is it time for bigger injectors?
I'd be curious to see what your A/F ratio looked like at the top end. I'm scared to death to run my 383 hard with 24# injectors....and until I get a tune done with my 42#, I'm laying out of it.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
Alex Barnes
LT1 Based Engine Tech
16
Jan 24, 2015 10:21 PM