CamaroZ28.Com Message Board
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

CamaroZ28.Com Message Board (https://www.camaroz28.com/forums/)
-   LT1 Based Engine Tech (https://www.camaroz28.com/forums/lt1-based-engine-tech-9/)
-   -   Solid Roller Lifter part numbers, please. (https://www.camaroz28.com/forums/lt1-based-engine-tech-9/solid-roller-lifter-part-numbers-please-534663/)

quickSS Apr 17, 2008 06:49 PM
Originally Posted by Rumblin1 (Post 4768595)
From what I've been able to find it appears that Crane, 101510-16, and Morel, 100-SR, make SR lifters utilizing the stock link bars and bracket.
Rumblin1 posted it. The Crane 101510-16 uses the stock guide system.
http://store.summitracing.com/partde...6&autoview=sku

If you get lifters with the link bars, and they are not +.300" tall then the link bar hits the lifter bore boss and the lifters won't ride the cam.

If you get the +.300" tall link bar lifters then they are hard to install with the heads on.

The Cranes look like a good solution.


All times are GMT -5. The time now is 05:00 AM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


© 2026 MH Sub I, LLC dba Internet Brands