Man i have the valve covers off the car pretty hight but not enough to lay the headers up at an angle can someone help me out> I need to know how to this damn thing in!

 

if your installing the hooker longtubes your gonna have to undo the motor mount, just 3 bolts, then jack up the engine just a little and the longtubes will slide right up. Thats how i did it

 

unbolt the motor mount on the passenger side and jack the engine up, I slid mine in from the top...

 

how high do you have to get the car i have it at an insane angle with out the motor jacked but i mean it still hits the drive way?

 

Ok I jacked the **** out of the motor and the back of the headers were touching the back of the cylender heads, and it still will not slide in at all and the bottom is a no contest i canted get it that high, how high can i go without it damaging anything?

 

I just got it higher but now it seems like it is just lifting the car the back header keeps touching the very end or the heads, if i could move them damn silver metal tubing by the computer i could probable manover it in better

 

I just unbolted my passenger side motor mount and i didnt have to jack the motor up very high. The header then slid in pretty easy from the bottom.