CamaroZ28.Com Message Board

CamaroZ28.Com Message Board (https://www.camaroz28.com/forums/)

- LT1 Based Engine Tech (https://www.camaroz28.com/forums/lt1-based-engine-tech-9/)

- - no start (https://www.camaroz28.com/forums/lt1-based-engine-tech-9/no-start-269394/)

96formy

Jun 6, 2004 02:13 PM

no start

how would these codes result in a no start condition?
p0200: open injector
p0300: missfire
p0441: emmisions non flow
p01441: manufacture secondary system.

i know how the missfire is because of the injectors. but could these result in a no fire?

shoebox

Jun 6, 2004 04:58 PM

P0200 Injector control circuit
P0300 Engine misfire detected
P0441 Evaporative Emissions (EVAP) system no flow (during purge)
P1441 Evaporative Emissions (EVAP) system flow during non-purge

If injectors were getting no power, then it's not going to start. I would be checking fuses, especially since it looks like your EVAP is not working either.

Your code descriptions were a bit vauge. My Tech Page has a list of all the codes.

All times are GMT -5. The time now is 09:36 AM.