no start
Thread Starter
Registered User
Joined: May 2004
Posts: 1
no start
how would these codes result in a no start condition?
p0200: open injector
p0300: missfire
p0441: emmisions non flow
p01441: manufacture secondary system.
i know how the missfire is because of the injectors. but could these result in a no fire?
p0200: open injector
p0300: missfire
p0441: emmisions non flow
p01441: manufacture secondary system.
i know how the missfire is because of the injectors. but could these result in a no fire?
Registered User
Joined: Dec 1969
Posts: 27,725
From: Little Rock, AR
P0200 Injector control circuit
P0300 Engine misfire detected
P0441 Evaporative Emissions (EVAP) system no flow (during purge)
P1441 Evaporative Emissions (EVAP) system flow during non-purge
If injectors were getting no power, then it's not going to start. I would be checking fuses, especially since it looks like your EVAP is not working either.
Your code descriptions were a bit vauge. My Tech Page has a list of all the codes.
P0300 Engine misfire detected
P0441 Evaporative Emissions (EVAP) system no flow (during purge)
P1441 Evaporative Emissions (EVAP) system flow during non-purge
If injectors were getting no power, then it's not going to start. I would be checking fuses, especially since it looks like your EVAP is not working either.
Your code descriptions were a bit vauge. My Tech Page has a list of all the codes.
Thread
Thread Starter
Forum
Replies
Last Post
Alex Barnes
LT1 Based Engine Tech
16
Jan 24, 2015 10:21 PM