CamaroZ28.Com Message Board

CamaroZ28.Com Message Board (https://www.camaroz28.com/forums/)
-   LT1 Based Engine Tech (https://www.camaroz28.com/forums/lt1-based-engine-tech-9/)
-   -   LT1 mods (https://www.camaroz28.com/forums/lt1-based-engine-tech-9/lt1-mods-468376/)

Darkfire00 Aug 24, 2006 11:17 PM

LT1 mods
 
looking at getting a 96 TA A4 with a trq converter, SLP headers, and a borla exaust, and Firehawk rims/tires any idea of what one would run with those mods?:confused:

T WS6 A Aug 24, 2006 11:19 PM

Re: LT1 mods
 
Low 13's, high 12's on DR's....

Darkfire00 Aug 24, 2006 11:21 PM

Re: LT1 mods
 
holy ****, ya its for sale, gots 85k miles, t-tops, leather, all for 4800

sounds like a good buy

MeanGreen97Z Aug 24, 2006 11:21 PM

Re: LT1 mods
 
I'd say some low 13s at about 106 mph.

White95LT1 Aug 24, 2006 11:22 PM

Re: LT1 mods
 
Depends on what stall Verter you are going to be running....Now I havn't ran mine yet but I have full bolt ons with a 2800 stall and im guessing it's maybe going to turn in a 13.4 - 13.6...just an educated guess......for a good verter at a good price check out these guys. http://www.partshp.com/Converters.htm I've only got the Super Street Raptor in the 2800 stall and I love it..wasn't too expensive either

T WS6 A Aug 24, 2006 11:26 PM

Re: LT1 mods
 

Now I havn't ran mine yet but I have full bolt ons with a 2800 stall and im guessing it's maybe going to turn in a 13.4 - 13.6...
^^I ran a 13.31@103mph with just LT's and DR's, soo im assuming with your TC you should at least be in the low 13's...

Darkfire00 Aug 24, 2006 11:29 PM

Re: LT1 mods
 
anybody know how much it is to replace the light engins "the lights are going out on the TA" and they go up but not back down unless u do it manualy

MeanGreen97Z Aug 24, 2006 11:32 PM

Re: LT1 mods
 
The motors go for about 35$ each on ebay.

nodnarb481 Aug 24, 2006 11:47 PM

Re: LT1 mods
 

Originally Posted by White95LT1
Depends on what stall Verter you are going to be running....Now I havn't ran mine yet but I have full bolt ons with a 2800 stall and im guessing it's maybe going to turn in a 13.4 - 13.6...just an educated guess......for a good verter at a good price check out these guys. http://www.partshp.com/Converters.htm I've only got the Super Street Raptor in the 2800 stall and I love it..wasn't too expensive either

good god youve just become my hero... ive been looking for an afordable 2800 stall and that just takes the cake!

nodnarb481 Aug 25, 2006 01:22 PM

Re: LT1 mods
 
TTT i want to know more about those stalls!

91RSLT1 Aug 25, 2006 01:52 PM

Re: LT1 mods
 

Originally Posted by White95LT1
Depends on what stall Verter you are going to be running....Now I havn't ran mine yet but I have full bolt ons with a 2800 stall and im guessing it's maybe going to turn in a 13.4 - 13.6...just an educated guess......for a good verter at a good price check out these guys. http://www.partshp.com/Converters.htm I've only got the Super Street Raptor in the 2800 stall and I love it..wasn't too expensive either

In my 96z I went 13.5 @104 on a 2.1 60' with CAI, cutout, 3.73, vig2800, UD pulley, Madz28 tune, stock manifolds, street tires, and other little stuff (1le elbow, ls1 drive shaft, descreened MAF). So I think you are right in your guess. I also think Darkfire00 sould be in that range. Now for some DR, LT's, and 1.6 RR, I hope those will put me in the 12's once I can use the converter.

snakeatinZ Aug 25, 2006 03:51 PM

Re: LT1 mods
 

Originally Posted by Darkfire00
holy ****, ya its for sale, gots 85k miles, t-tops, leather, all for 4800

sounds like a good buy

I would jump all over that if I had the $. That sounds like a good buy. Any pics???
Steve


All times are GMT -5. The time now is 06:22 AM.


© 2026 MH Sub I, LLC dba Internet Brands